1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Panasonic PT-AE4000U - Dust Spec imperfection on screen?

Discussion in 'Displays' started by LordX, Jan 29, 2012.

  1. LordX

    LordX Member

    Joined:
    Jan 30, 2009
    Messages:
    18
    Likes Received:
    0
    Hey all - I just bought a Panasonic PT-AE4000U Projector a few weeks ago. (Less than 2 weeks up and running!). I finally got all the initial glitches sorted out - and now am sitting down to finally truly enjoy the unit. While watching something very bright - I noticed a spec on the screen. I went up to the screen to brush it off - it is NOT on the screen. My next move was to examine the area between the PJ and the screen (dangling spider?) and the area was clean. I even brushed off the lens on the PJ to no avail. When I look at the lens - it looks like there are many glass surfaces - not just the one I can wipe. How can I clean this? And is this something I should be concerned with in a NEW Pj? Also - I had an old PJ for 4 years in the same room - never had this issue. Thanks for any info! PS - What material/cleaning solution would you guys recommend to clean the lens itself? I do NOT want to smudge or damage the unit of course - nor do I want to leave MORE residue than before it was cleaned.
     
  2. Jim Mcc

    Jim Mcc Well-Known Member

    Joined:
    Feb 11, 2004
    Messages:
    3,757
    Likes Received:
    38
    Location:
    Oconomowoc, WI.
    Real Name:
    Jim
    It sounds like it's a "dust blob" inside the projector. It may have to be taken apart to clean it. I would Pan. and see what they say. To clean the lens, I recommend the "Lens Pen". I bought mine at Art's Cameras.
     

Share This Page