1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Ok to drill the back of JBL E 20

Discussion in 'Speakers' started by Chad Isaacs, Apr 6, 2006.

  1. Chad Isaacs

    Chad Isaacs Well-Known Member

    Joined:
    Feb 20, 2000
    Messages:
    763
    Likes Received:
    0
    Hey guys,

    I just got my entire new home theater setup last week. I went with E30 and Ec35 for the front, E20 for the sides and E10 for the rears powered by an Onkyo 503 receiver, Oppo dvd player and Z3 projector. I was running out of money so I went with the JBL 250 sub, and guess what, I love it! Sure, its not as good as my old SVs but for now, its perfect.

    Anyway, my delima now is I need to mount the speakers on the wall. Is it safe to drill / mount speaker mounts to the back of the speaker? I guess I am worried about drilling into the crossover and damaging something.

    Thanks.
     
  2. BillSuneson

    BillSuneson Well-Known Member

    Joined:
    Sep 16, 2005
    Messages:
    128
    Likes Received:
    0
    Personally a 10 dollar shelf from target would make me sleep easier than drilling into the back of a speaker. Also that will hurt resale if you ever decide on that.
     
  3. Chad Isaacs

    Chad Isaacs Well-Known Member

    Joined:
    Feb 20, 2000
    Messages:
    763
    Likes Received:
    0
    Hey,

    I guess I would have to agree that drilling my speakers would not be the best idea, so, I went to Home Depot on my lunch break tonight ( I work 2-11 pm) and grabbed 2 nipples, 4 flanges and a piece of scrap wood and I am going to make my own little cheap strong shelf, with no holes drilled in the speaker... and the "shelf" will be invisible.
     
  4. Jeremy Stockwell

    Jeremy Stockwell Well-Known Member

    Joined:
    Aug 9, 2001
    Messages:
    608
    Likes Received:
    0
    FWIW,

    See Phil Iturralde's post (and links) in this thread (re: JBL S-Series -- don't know that it makes any difference as long as you make sure you don't drill into the crossover!).

    JKS
     

Share This Page