1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Ohm Setting question

Discussion in 'AV Receivers' started by Steve_Moo, Jun 7, 2003.

  1. Steve_Moo

    Steve_Moo Well-Known Member

    Joined:
    Nov 28, 2002
    Messages:
    171
    Likes Received:
    0
    I just purchased the JVC 10VBK Receiver which has a setting on the back for 4-6ohms or 8 ohms which do I want to select.

    I have Paradigm Monitor 7's as Mains, CC-370 as Center, ADP-170s as Surrounds and Mini Monitors as Rears.

    Thanks
     
  2. David-TF

    David-TF Active Member

    Joined:
    Aug 31, 2002
    Messages:
    34
    Likes Received:
    0
    Not familiar with those speakers but the speaker manual will tell you what they are, my guess would be 8 ohms so set your receiver to match your speakers.
     
  3. John Garcia

    John Garcia Well-Known Member

    Joined:
    Jun 24, 1999
    Messages:
    11,572
    Likes Received:
    23
    Location:
    NorCal
    Real Name:
    John
    These speakers are all 8ohm nominal, so that is what I would recommend you set the receiver to.
     

Share This Page