1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

No idea what I'm doing. Need help

Discussion in 'Beginners, General Questions' started by Lunchbox824, Mar 29, 2014.

  1. RajCaj

    RajCaj Member

    Joined:
    Apr 1, 2014
    Messages:
    19
    Likes Received:
    1
    Real Name:
    Jason
    As schan mentioned, your new receiver should be able to receive audio via the HDMI cable coming from your TV, but ONLY if your TV's HDMI port is ARC enabled (HDMI version 1.4), and you're using the appropriate quality HDMI cable.

    I've recently found this out the hard way, after purchasing a new receiver.....thinking that I'd be able to get rid of the optical audio out cable I was using for my old receiver, but then found out that my 2009 Samsung Smart TV had only HDMI v1.3 ports, and was not ARC enabled.
     
    Lunchbox824 likes this.
  2. Lunchbox824

    Lunchbox824 Member

    Joined:
    Mar 29, 2014
    Messages:
    24
    Likes Received:
    0
    Real Name:
    Rick
    Ok, so I FINALLY got everything delivered and ready to install. We put two of the ceiling speakers up for now. Might put the third in at a later date. I'm going to have one of my friends that has some knowledge hook everything up so I don't have to have a professional come in and pay over $500 to have things hooked up.

    Question... How in the heck do you hook up so many wires through the speaker selector and into the receiver? There are 6 coming out of the sound bar, 8 for the ceiling speakers and 8 for the outdoor speakers. With only 14 hookups on the receiver and 16 on the speaker selector. What wires go where and can you combine two lefts to go into one receptacle or something like that?
     

Share This Page