1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

new blueray won't click out of pro logic

Discussion in 'Playback Devices' started by Philip_G, Nov 23, 2008.

  1. Philip_G

    Philip_G Producer

    Joined:
    Nov 13, 2000
    Messages:
    5,035
    Likes Received:
    0
    This has been driving me crazy all night.
    I have a new samsung BD-P1500 connected to my old pioneer elite 35TX receiver via optical.
    On blue ray and on DVD media, if I hit the audio button on the blueray player it displays DD5.1 or DTS5.1, however my receiver won't click out of pro logic. If I switch sources over to my DTV receiver it pops right into dolby, I thought I had a setting off on the DVD source so I swapped the optical cables, sure enough it clicks back into pro logic on the SAT source too.
    Any ideas? I'm going crazy over here.

    Tried multiple dics, both blueray and DVD, tried DD and DTS, same on all. I found it when I was trying to rebalance my setup with avia because it's mixing the FS and RS channels together.

    The receiver is in analog/digital auto mode, and THX auto mode, if anyone cares.
     
  2. Philip_G

    Philip_G Producer

    Joined:
    Nov 13, 2000
    Messages:
    5,035
    Likes Received:
    0
    Geeze I'm slow tonight. Never set the output to bitstream.
    guess that shows you how long it's been since I set up a new component.
     

Share This Page