1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Need help in designing a full range, one driver speaker...

Discussion in 'Home Theater Projects' started by Javier_Huerta, Jul 21, 2004.

  1. Javier_Huerta

    Javier_Huerta Well-Known Member

    Joined:
    Mar 9, 2002
    Messages:
    621
    Likes Received:
    0
    Hi all!

    After building a couple of subs, I think I'd like to try and build a full range speaker now... the temptation is too much to resist, and my PC speakers are gone (some old JBL Control LA) so I have the hardware to play with.

    I'd love to build someone with an extremely high quality / price ratio, so I thought about starting with Tang Band drivers. But, IIRC, the specs seem to be a bit different in PE's catalogue than in their Web page. I remember lots of drivers with 3mm of Xmax and 65-20KHz frequency response ranges, but apparently, those have disappeared from their page.

    I think I might want the following drivers...

    W3-881S 3"
    http://www.partsexpress.com/pe/pshow...64-812&scqty=1

    100-20KHz response, but 0.5 mm XMax!

    W3-594S 3"
    http://www.partsexpress.com/pe/pshow...64-814&scqty=1

    100-20KHz response, but 0.4 mm XMax!


    W4-1052SA 4"
    http://www.partsexpress.com/pe/pshow...64-828&scqty=1

    4 mm XMax, but 60-15KHz response (and quite ragged!)


    Quite simply, I don't know what to choose. Should I go with four 3" drivers, and build a line array? Use the 4" driver due to the great Xmax? I assume I'd like to build a ported system, so maybe a pair of 3" could generate enough bass and have a nice frequency response.

    Eventually, I'm planning to build my speakers using 1/2" MDF, in braced boxes, and veneer them to custom match the furniture, so if they sound right enough, I'll use them with a vintage 1959 General Electric tube amp. That's the reason I worry so much about accuracy.

    Help... I really don't know what should I go for... [​IMG]
     
  2. Wayne A. Pflughaupt

    Wayne A. Pflughaupt Well-Known Member

    Joined:
    Aug 5, 1999
    Messages:
    6,040
    Likes Received:
    17
    Location:
    Katy, TX
    Real Name:
    Wayne
    You’ll certainly need multiple drivers. What you’re proposing is similar to the Bose speakers – 901, etc. Many people agree that you just don’t get the proper high-end “sheen” without a good-quality tweeter. And with so small a woofer, bass extension will be a problem. However, with multiple drivers you could safely use equalization to make up some of the difference, which is what Bose uses on some of their small driver/full range speakers.

    Regards,
    Wayne A. Pflughaupt
     
  3. Dennis_H

    Dennis_H Well-Known Member

    Joined:
    Apr 5, 2001
    Messages:
    99
    Likes Received:
    0
    I'm currently using the W3-871S 3" TB full range speakers in my bedroom. They sound remarkably good for the money, but don't get very loud. A friend of mine who is very tight on money right now is considering builing a some single driver speakers also. I have looked into the W4-930SA for him. Has anyone used these? They are rated 40W with 2mm Xmax. FR is 65-18K ( I think). They are available from Acoustic Technologies (used to be Nuera) like the W3-871S.

    Thanks,
    Dennis
     
  4. GrahamT

    GrahamT Well-Known Member

    Joined:
    Sep 13, 2003
    Messages:
    556
    Likes Received:
    0
    I also built a pair of speakers using the TB W3-871S driver and they are very good for the price. Right now I think I will try another pair using the new wr125s driver from www.creativesound.ca . It is a 4" full range with Adire's XBL^2 so it should be extremely accurate, and it has 6mm Xmax so extension should also be very good. If it lacks the high end "sheen" Wayne mentions I will add tweeter later. Hope this helps.
     
  5. Javier_Huerta

    Javier_Huerta Well-Known Member

    Joined:
    Mar 9, 2002
    Messages:
    621
    Likes Received:
    0
    Wayne, thanks for your reply! I'd definitely NOT want to build anything similar to anything made by Bose! [​IMG] Although apparently equalizing these little drivers is one way to get a decent response, I saw one speaker in PE's catalogue that could get to "F3's at mid 50 Hz" in a vented box (they don't sell it anymore). Dennis, Graham, thanks for your suggestion. I'm looking at other drivers as well now.

    What I'm thinking right now is buying 4 or 3 4" drivers per speaker, and building a small floorstanding line array for using with a tube amplifier. I *guess* the not-so extended frequency response I'll get by not using a tweeter may be somehow beneficial with a warm tube amp. I'm not sure... but at the price of a Tang Band driver, I might want to experiment.

    So far, I've only found 1 line array on the Internet with Tang Band drivers. It used 32 (yep, 32) 2" drivers, and apparently, the owner didn't like it that much (comb filtering, little bass response, ragged high frequency response). Hmmm...
     
  6. Mark Hayenga

    Mark Hayenga Well-Known Member

    Joined:
    Jun 11, 1999
    Messages:
    608
    Likes Received:
    0
    Have you considered the Aura 3" from Madisound?
     
  7. TimForman

    TimForman Well-Known Member

    Joined:
    Dec 4, 2002
    Messages:
    847
    Likes Received:
    0
    I recommend using the W3-871S or the W4-1052SA with mods. The 3" TBs from PE aren't going to give you the same performance. Consider carefully the mini line array route. There are inherent problems that are difficult to overcome. You'll notice that most incorporate a tweeter to help with some of this such as the designs from Creative Sound, RAW Acoustics and GR Research. The most common problem is if the line ends below ear level there is a large drop in HF response. This is why Dr. Jim Griffin describes floor to ceiling designs in his white paper. One very simple design would be a small bipole ML-TL using the 871s. You may or may not roll off the rear driver with a single inductor. This design will produce higher SPL, better LF response than a single driver design and less of a boxy sound. It might not be up to the SPL levels needed for a large HT room but it's a good start into full range drivers.

    thread for TL W3-871S
     
  8. Javier_Huerta

    Javier_Huerta Well-Known Member

    Joined:
    Mar 9, 2002
    Messages:
    621
    Likes Received:
    0
    Tim, I can't thank you enough for your help. I'm looking to build something different, and I'm not interested in high SPL's... just something cute and nice to get me started in DIY speakers.

    I looked at Creative Sound. Their SuperElf design seems interesting. I e-mailed them to see if they can send that stuff to México... fingers crossed. [​IMG]
     
  9. Adam Demuth

    Adam Demuth Active Member

    Joined:
    Aug 23, 2003
    Messages:
    39
    Likes Received:
    0
    Try these guys out... The whole TL thing may not be your cup-o-tea, but definitly quite a few single driverprojects and single driver recommenations.
    www.t-linespeakers.org
     
  10. TimForman

    TimForman Well-Known Member

    Joined:
    Dec 4, 2002
    Messages:
    847
    Likes Received:
    0
    Yep, that's Dave Dlugos' site. You'd better be careful, next thing you know you'll be hanging out at Fullrangedriver.com
    [​IMG]
     
  11. Rory Buszka

    Rory Buszka Well-Known Member

    Joined:
    Jun 5, 2002
    Messages:
    784
    Likes Received:
    0
    There is a Vifa MG-series woofer (yellow woven glass fiber 4" cone) that is supposed to function very well as a full-range driver. It only has response out to 15,000 Hz and down to 100 Hz, but supposedly it does everything else very well.
     
  12. TimForman

    TimForman Well-Known Member

    Joined:
    Dec 4, 2002
    Messages:
    847
    Likes Received:
    0
    Funny you should mention that. Scroll down a tad.

    Vifa T-line
     

Share This Page