MalluS
Auditioning
- Joined
- Oct 13, 2004
- Messages
- 10
Guys:
I recently bought a Pansonic S97 DVD Player and had bought the Avia disk in last month to calibrate TV with the new dvd player purchase. I have a Sony XBR 60'' RPTV. Being a newbie to calibration, I started out with setting the picture mode on tv to 'Professional' and settings of DVD Player to default. I went thru the disk where they explain the tests and then show the actuals to personalize your TV.
My Setup
TV: Sony XBR 60'' LCD RPTV
TV Mode: Professional
DVD Player: Panasonic S97
Settings: Default
Connection: HDMI cable from DVD Player, connected via HDMI(female)-DVI(male) Adapter into TV's DVI Port.
Resolution: 720p
Gotta say, Im totally lost! The only thing I set correctly was Hue using the blue filter! Thats it! Other than that, I could not correctly set the brightness or Picture correctly. Color was not an option in the basic setup so could not adjust it.
For Picture settings, the demo talked about two vertical bars that would move thru the screen but I did not see them at all. I saw the small horizontal blocks but was not sure at what point was the box under one would be twice darker than above.
For black (brightness) settings I think, I saw the black on left and gray on right, but did not know what should I be looking at !! Again did not see any two vertical bars moving.
Finally was the sharpness pattern with circle in center and bars on top and bottom of screen, again..had no clue why I could not see the white lines between the black, that supposedly I should have seen when the brightness was totally notched up. Was not sure where I should be setting the sharpness.
Needlessly to say, I had no clue what I was doing Can you tell me what am I missing here...feel totally lost
Your help shall be greatly appreciated
I recently bought a Pansonic S97 DVD Player and had bought the Avia disk in last month to calibrate TV with the new dvd player purchase. I have a Sony XBR 60'' RPTV. Being a newbie to calibration, I started out with setting the picture mode on tv to 'Professional' and settings of DVD Player to default. I went thru the disk where they explain the tests and then show the actuals to personalize your TV.
My Setup
TV: Sony XBR 60'' LCD RPTV
TV Mode: Professional
DVD Player: Panasonic S97
Settings: Default
Connection: HDMI cable from DVD Player, connected via HDMI(female)-DVI(male) Adapter into TV's DVI Port.
Resolution: 720p
Gotta say, Im totally lost! The only thing I set correctly was Hue using the blue filter! Thats it! Other than that, I could not correctly set the brightness or Picture correctly. Color was not an option in the basic setup so could not adjust it.
For Picture settings, the demo talked about two vertical bars that would move thru the screen but I did not see them at all. I saw the small horizontal blocks but was not sure at what point was the box under one would be twice darker than above.
For black (brightness) settings I think, I saw the black on left and gray on right, but did not know what should I be looking at !! Again did not see any two vertical bars moving.
Finally was the sharpness pattern with circle in center and bars on top and bottom of screen, again..had no clue why I could not see the white lines between the black, that supposedly I should have seen when the brightness was totally notched up. Was not sure where I should be setting the sharpness.
Needlessly to say, I had no clue what I was doing Can you tell me what am I missing here...feel totally lost
Your help shall be greatly appreciated