1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

How to calibrate coax stripper tool?!?

Discussion in 'Archived Threads 2001-2004' started by Lynn Johnson, Jan 31, 2003.

  1. Lynn Johnson

    Lynn Johnson Well-Known Member

    Dec 12, 2001
    Likes Received:
    Well, I started playing around, attempting to make my first component cables yesterday. Well, the first cut wasn't "exactly" perfect, so I attempted to adjust, and adjust again, and again...etc. So now, it isn't anywhere near where it started. Anyone have a good idea on how to get it back to near default? The tool I am referring to is the one used here...


    Thanks in advance!
  2. Sanjay Uppal

    Sanjay Uppal New Member

    Jan 25, 2003
    Likes Received:

    If you are referring to the Canare TS-100E, the foldout manual came with the settings for the Screws A and B left, B middle and B right. So for the cable you are setting it to, read off the setting value in mm, take the handy ruler that came with the unit and turn the screws until you reach the setting.

    I do not know of any automated way to get the default values back save adjusting them individually using the set screw settings in the foldout.


Share This Page