1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Home Theater -Project

Discussion in 'Home Theater Projects' started by Jukka Ylikarppa, Apr 21, 2003.

  1. Jukka Ylikarppa

    Jukka Ylikarppa New Member

    Joined:
    Apr 21, 2003
    Messages:
    3
    Likes Received:
    0
    Finally I finished something. I updated my homepages concerning about my home theater -project but something is missing. I would like to have some feedback about my project, so positive and negative feedback is welcome. Just surf my pages.

    Link: http://personal.inet.fi/koti/hometheater
     
  2. JoelTW

    JoelTW Well-Known Member

    Joined:
    Apr 1, 2003
    Messages:
    110
    Likes Received:
    0
    I don't see anything
     
  3. Hank Frankenberg

    Hank Frankenberg Well-Known Member

    Joined:
    Oct 13, 1998
    Messages:
    2,573
    Likes Received:
    0
    I saw it, and Jukka, you have done some very nice work! I compliment you on your detailed approach to your speaker project. Your speakers look very nice.
     
  4. Jukka Ylikarppa

    Jukka Ylikarppa New Member

    Joined:
    Apr 21, 2003
    Messages:
    3
    Likes Received:
    0
    Ok, There has been some problems with the images and I hope that I fixed that problem but if there is still same problems with the images then notify me please...
     
  5. Jonathan M

    Jonathan M Well-Known Member

    Joined:
    Jul 23, 2002
    Messages:
    267
    Likes Received:
    0
    Hi Jukka,

    Great job on the speakers (and the website!) - and a good guide to veneering too!

    Well done.
     
  6. Jukka Ylikarppa

    Jukka Ylikarppa New Member

    Joined:
    Apr 21, 2003
    Messages:
    3
    Likes Received:
    0
    Thanks, There is lots of different approaches how the verneering should be done. Some uses ironing, some uses pressing -method and someones even do the verneering on the both sides. I think the method that I used in verneering is the most easiest way and it gives also good result...
     

Share This Page