1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

HMDI Splitter/Power Booster Stops working????

Discussion in 'Beginners, General Questions' started by block, Jun 26, 2012.

  1. block

    block New Member

    Joined:
    Jun 26, 2012
    Messages:
    1
    Likes Received:
    0
    I have a CE Labs HA4-3 HDMI Distribution Amplifier with the HDMI input from my receiver. The receiver gets a signal from both a DTV DVR and LG BLue Ray. The signal had been split via port 1 and 2 to a main and secondary TV respectively. THe main TV works fine, but now there is no signal to the secondary TV and the corresponding red-light on port 2 to the secondary TV no longer is on/lit up.. This signal had been working fine for over 2 years???? Why would there suddenly be a loss of signal from port 2? Should I simply try a different port (3 or 4)?
    Thanks!:)
     
  2. Robert_J

    Robert_J Well-Known Member

    Joined:
    Aug 22, 2000
    Messages:
    8,264
    Likes Received:
    46
    Location:
    Mississippi
    Real Name:
    Robert
    That's always the first step. It will determine if your output port has gone bad.
    It's electronic. They go bad sometimes.
     

Share This Page