1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

HELP: Outlaw PCA cables- Can't get them out

Discussion in 'Accessories, Cables, and Remotes' started by Khaled_H, May 19, 2003.

  1. Khaled_H

    Khaled_H Extra

    Joined:
    Jan 2, 2001
    Messages:
    16
    Likes Received:
    0
    Hi,

    Ok, I tried and tried but I can't get the cable out from the pre-amps input jacks. I am using Outlaw 950 pre-amp and have the outlaw interconnect to the CD-in locked-in. I needed to connect a new component to the input. Attempting to take the interconnect out from my CD player, ended up spoiling the CD players analog RCA jacks. Have anybody else had this problem. I am trying to turn the silver jacket on the cables connector counter-clockwise but it will not turn.

    Thanks,
    Khaled[​IMG]
     
  2. Garrett Adams

    Garrett Adams Supporting Actor

    Joined:
    Sep 27, 2000
    Messages:
    931
    Likes Received:
    0
    You are turning in the wrong direction. Turn clockwise to loosen.
     
  3. DaleBesh

    DaleBesh Stunt Coordinator

    Joined:
    Oct 26, 2002
    Messages:
    163
    Likes Received:
    0
    I like the construction of those cables, but the locking feature is not very intuitve, though I like the concept.

    There was one that gives you a ground first then center connection. have not heard much about those anymore.
     
  4. Garrett Adams

    Garrett Adams Supporting Actor

    Joined:
    Sep 27, 2000
    Messages:
    931
    Likes Received:
    0
    I agree Dale. In my little section of the world most things that screw on/off are based on a right-hand thread.
     

Share This Page