1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

DVD audio connection for SR7200 or sr 7300

Discussion in 'Playback Devices' started by Hisham_k, Mar 28, 2003.

  1. Hisham_k

    Hisham_k Auditioning

    Joined:
    Nov 24, 2002
    Messages:
    14
    Likes Received:
    0
    Hi guys :
    for the owners of marantz SR 7200 or Sr 7300 , by connecting
    a DVD audio player thru the analog inputs, to what input do you set the receiver to : will it be multichannel or do you keep it
    in auto mode ?
    Using multichannel input will require going to the menu of the receiver every time and setting the multichannel to on.
    Then for watching movies it should be set to off. A digital connection is used as well from the dvd player to the receiver.
    By the way I am using a CP-72 as a DVD-A and DVD-V.
    Your help is highly appreciated.
     
  2. ChrisAG

    ChrisAG Supporting Actor

    Joined:
    Aug 26, 2001
    Messages:
    503
    Likes Received:
    0
    [​IMG] [​IMG] [​IMG]

    Sorry, but you're wrong on almost every count!

    "Auto" mode is not for sensing an input, but rather for a surround processor mode (e.g. Dolby Digital or Dolby Pro-Logic, etc.)

    For connecting DVD-A or SACD, you would use the 6.1-ch input (7.1 on the 7300), [even though DVD-A and SACD are only 5.1, Marantz has the extra input channel].

    You do not need to go into the on screen display in order to activate or de-activate the input, there is a switch on the front of the receiver and a button on the remote for this.
     

Share This Page