1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

DIY theater seats

Discussion in 'Hardware Classifieds' started by TeddM, Nov 12, 2003.

  1. TeddM

    TeddM Active Member

    Joined:
    Apr 19, 2003
    Messages:
    42
    Likes Received:
    1
    I have eight theater seats out of the St Clair Theater in Toronto Ontario. All metal has been sandblasted and spray painted in a black hammered metal finish. I also have the proper end of row risers for two rows to accomodate a 2x3 or 2x4 seating pattern. There is new foam for six seats (was going 2 rows by three seats wide)and brown/black material to cover eight seats. There's also new burlap to cover the seat springs. I kept one plastic armrest and one end panel to use as patterns for replacements out of wood. Still very much a DIY project but if anyone local to the GTA area of Ontario is looking for inexpensive theater seating, I am after $300 (Canadian).
     

Share This Page