1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Denon menu screen while using DVE

Discussion in 'AV Receivers' started by AmusingistheDawn, Jan 14, 2009.

  1. AmusingistheDawn

    AmusingistheDawn Well-Known Member

    Joined:
    Nov 2, 2008
    Messages:
    155
    Likes Received:
    0
    I would like to use the pink noise on the dve with my spl meter to set levels...but the only way to change the levels that I have figured out so far is to shoot to the menu screen (which uses the tv so you can't see the dve anymore...just the big black menu screen)...and adjustments of the channel levels can only be done when the internal test tones are going off. How are you supposed to use a meter with the DVE pink noise screen with Denon receivers?
     
  2. David Willow

    David Willow Babbling Idiot
    Supporter

    Joined:
    Jan 23, 2004
    Messages:
    2,246
    Likes Received:
    128
    Location:
    Mechanicsburg, PA
    Real Name:
    Dave
    Look at your remote - it may have buttons to do this. My Onkyo does.

    However, that is not why I'm responding... Why not use the internal tones? They are 75db (-30db) and will be more accurate than using a disc with Dolby or DTS.
     
  3. AmusingistheDawn

    AmusingistheDawn Well-Known Member

    Joined:
    Nov 2, 2008
    Messages:
    155
    Likes Received:
    0
    Most people prefer to use the DVE pink noise from what I've read.
     
  4. David Willow

    David Willow Babbling Idiot
    Supporter

    Joined:
    Jan 23, 2004
    Messages:
    2,246
    Likes Received:
    128
    Location:
    Mechanicsburg, PA
    Real Name:
    Dave
    Then I disagree with "most people" [​IMG]
     

Share This Page