denon avr1912 tv audio (1 Viewer)

[fender62]

i have a panasonic tx-p42s30b connected to a denon avr1912 via hdmi, how do i get the denon to play the audio for the panasonic
what settings on the denon do i use and how, a walk through would be very appreciated

 

[schan1269]

What audio do you need "off the Panasonic"?
The only audio worth taking off is its own tuner. If anything is "connected to the TV", you are better off connecting that to the 1912.

 

[fender62]

if im watching a movie id like to hear it coming out of the denon instead of the televisions speakers

 

[schan1269]

Connect your TV via toslink to the 1912. Done, easy peasy.
So, the source of this movie must either be OTA or cable connected to the 75ohm on the TV. Right?
Cause that is the only scenario where it makes sense to want audio off the TV.

 

[schan1269]

I just checked, you could turn the ARC on in both the TV and AVR. But the only 5.1 you'll get is off the tuner(like I said earler...OTA or cable connected to the 75ohm)

 

[fender62]

i cant find anything that says arc in settings on tv, or amp

 

[schan1269]

Have you read the owners manuals?
Cause I have to go download the owners manuals to tell you which page of the owners manual to look at.

 

[fender62]

i figured it out, i had the hdmi cable in wrong hdmi input on the tv, i should have had it in hdmi2, works good now
thanks for advice