# dB

Discussion in 'Beginners, General Questions' started by Greg Bax, Oct 29, 2003.

1. ### Greg Bax Member

Joined:
Jul 7, 2003
Messages:
15
0
Can anyone tell me why the decibels on the receiver go down as the volume goes up? I was under the impression that the larger the dB number the louder the sound. For example 100dB would be louder than 50dB. But it appears that on the receiver the dB number goes down as the volume goes up.

2. ### Vince Maskeeper Well-Known Member

Joined:
Jan 18, 1999
Messages:
6,505
0
Because it's a scale of potential-- without getting to technical- the volume knnob is measured in attenuation: how much it is reducing the signal.

If you think of those numbers on the volume knob as being prefixed with a negative- it might be easier to picture in your head.

The way to picture the signal flow in your head is that your receiver is actually 2 stages: a preamp and an amplifier, seperated by a volume knob. If the volume knob was not there- The preamp supplies a FULL LEVEL signal to the AMP-- and the amplifer amplifies it and makes it REALL LOUD.

However the volume knob can regulate, specifically can reduce, the amount of signal flowing between the two. So the volume knob works kinda like a faucet knob- the water pressure is in the pipe, running up to the faucet knob-- and by opening it- you let the water out, up to the full pressure amount in the pipe... If you were to put a scale on the faucet knob- you could label it in terms of how much it was reducing the water flow, so at the "higest" level- when you get the most water, it would be labelled 0, as it would be allowing the full amount to pass from the pipe...

The idea being that 0 (which is probably the marking when the knob is all the way up on the receiver) means the full signal from the preamp is being passed onto the amplifer.

So if you think of it as a negative in terms of it's reduction of signal, at the lowest level, it is at -infinity, and as you turn it up it is -60, -50, -40 etc...

Hope that helps

-V

3. ### Wayne A. Pflughaupt Well-Known Member

Joined:
Aug 5, 1999
Messages:
6,040
17
Location:
Katy, TX
Real Name:
Wayne
Greg,

You have to first understand that the dB scale has meaning in all kinds of scientific measurement -- from sound, to electrical or mechanical power, to voltage, and so on.

Joined:
Aug 19, 2002
Messages:
4,791