1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Building a new sub incloser,sealed or ported?

Discussion in 'Speakers' started by Tim Dogg, May 5, 2004.

  1. Tim Dogg

    Tim Dogg Active Member

    Joined:
    Mar 4, 2004
    Messages:
    36
    Likes Received:
    0
    What does most people use in an home setup.Ive been doing car audio for many years and have been buiding mostly sealed enclosers.
    I see most home subwoofers are ported.Why ported over sealed and what would be the best tuned freq. for say 50% movies 5.1 and 50% music?
    I was thing about 40 hrts but i know a lot of dvds drop down to 25 or 20 hrtz.Any thoughts?
    I am running a samson pro amp that puts out about 550 pc at 8 ohms and 760 pc and 4.I would like to run 2 12" subs in seperate enclosers. Thanks Tim
     
  2. Mike SJ

    Mike SJ Well-Known Member

    Joined:
    Nov 10, 2003
    Messages:
    718
    Likes Received:
    0
    ...
     

Share This Page