1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Best to play USB movies through TV or Blu-Ray Player?

Discussion in 'Playback Devices' started by amecily, Dec 30, 2013.

  1. amecily

    amecily Member

    Joined:
    Dec 29, 2013
    Messages:
    9
    Likes Received:
    2
    Real Name:
    Amy
    Hi there,

    I would just like to know if it is best to play digital movies stored on a hard drive through a blu-ray player or through a TV?

    My TV is a Samsung 55F6800 and blu-ray player is a Sony BDP-S460. Would the blu-ray player be more adept at upscaling/would they both be the same?

    Thanks a lot,
    Amy
     
  2. schan1269

    schan1269 HTF Expert
    HW Reviewer

    Joined:
    Jul 4, 2012
    Messages:
    17,037
    Likes Received:
    894
    Location:
    Chicago-ish/NW Indiana
    Real Name:
    Sam
    It actually comes down to more "the content on said USB" rather than just being USB.

    Many TV can't digest DTS(that info is in the TV manual).

    Your BD player will accept "basically everything".

    The true test...is if the HTiB will accept DTS off the toslink. Many won't. But regardless...

    Play everything in the BD player. If you run across DTS on a USB the HTiB won't play...go back into setup on the BD player and change it to doing the decoding.

    Matter of fact...I'd set the BD player that anyway. The only issue will be if the HTiB doesn't accept multi-channel PCM over toslink.

    You'll just have settings for audio to play around with.

    Worst case is the HTiB won't take DTS or MCH PCM and you'll have to set DTS for "stereo downmix" and use Dolby ProLogic in the HTiB.
     

Share This Page