1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

B&O DIN 7 pinout needed

Discussion in 'Playback Devices' started by Scott Kilbourne, Jul 22, 2003.

  1. Scott Kilbourne

    Scott Kilbourne Active Member

    Joined:
    Dec 16, 2002
    Messages:
    33
    Likes Received:
    0
    I bought a used B&O turntable with cartridge and a phono preamp to use with my HT. The table has a DIN 7 on the end and I had to make an adapter to go to RCA. I used the shields together to pin 5, red hot to 2 and white hot to 3. One side works and the other side doesn't. I was working from some very confusing schematics the B & O provided, so I'm not at all sure the pinouts are right. I also don't know how to troubleshoot it to the adapter, the cartridge or something else inside the turntable. I know it's not the preamp, receiver or speakers because I swapped all that around and still have the same channel dead.

    what is the pinout on that DIN 7? If I've got it right, what else can I do to troubleshoot it?


    -Scott
     

Share This Page