1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

4 ohlms speakers

Discussion in 'AV Receivers' started by Clyde Metz, Apr 3, 2003.

  1. Clyde Metz

    Clyde Metz Active Member

    Joined:
    Feb 12, 2003
    Messages:
    35
    Likes Received:
    0
    Can one run the Dahlquist QX10 which is 4 ohms, with the Kenwood VR6070 which is 6 ohms, or would I need an additional amp? Is any one running QX10's with a receiver? Thanks.
    Clyde
     
  2. Marc H

    Marc H Well-Known Member

    Joined:
    Aug 22, 2001
    Messages:
    497
    Likes Received:
    0
    Hi Clyde,
    I have a client in New York state that uses the QX10s with that receiver.
    As they don't specify in the manual of the receiver, I called Kenwood to be sure there was no problem and their response was yes, no problem unless you use four ohm speakers at all locations. In that situation, the protection circuitry may shut down the receiver prematurely but no problem using four ohms as mains.
     
  3. Clyde Metz

    Clyde Metz Active Member

    Joined:
    Feb 12, 2003
    Messages:
    35
    Likes Received:
    0
    Thanks for the info! By the way I received emails from Bob Deasy from jonic and he is checking where in fl and oh I can find Dahlquist.
    Clyde
     

Share This Page