New Posts  All Forums:Forum Nav:

Theater Room set help!!!

post #1 of 4
Thread Starter 
Hello Alll I have just finished my first real theater room in my basement and could really use some good advice on the best way to set up my home theater system so i can get the best out of what i have biggrin.gif

Here is what i am running

pioneer vsx-92txh elite receiver

sony Blu-ray player

fios HD-DVR

(2) Harman Kardon citation 7.1 Thx lucas films certified amplifiers (bridged)

panamax m5100-pm Home theater power management

Triad classic gold LCR

triad classic gold surrounds

everything is connected via HDMI


any and all help will be greatly appreciated Thanks.
post #2 of 4

Jeff, what specifically are you looking for?  It sounds like you already have everything hooked up.  Love the Triads BTW, great choice.  Are the amps single or seven channel amps?  If they are singles I would go preamp out from the Pioneer to them and use them for the left and right channels.  If they are seven channel then preamp out all channels to the amps and hook up all speakers.

post #3 of 4
No mention of a sub woofer or TV. Did you run the automatic MCACC SETUP. Set your TV to Movie or Cinema picture mode for the simplest calibration.
post #4 of 4
Thread Starter 
Hi guys thanks for the replys biggrin.gif

i have a triad in room powered sub and a epson 8350 pj . the HK"S are 4x150 and im running them bridged 2x450 @8ohm bridged.
i should have been more clear SORRY the problem i am having has to do with the set up of the pioneer i ran the mcacc and all is good.
my problem is when i change inputs on the pioneer im getting this poping sound in all the speakers and dont know if its because i have not really set this up right ie assigning inputs ect. my brother gave me thisd system came over hooked it all up to get it going and left me to figure out the receiver as thats the only thing i purchased. so i think its either a set up issue or a grounding issue.today i am going to run a dedicated 20 amp circuit for the theater only as well as a isolated ground receptacle and hope for the best.

any input advice would be great.gonna hit the manual front to back now.
New Posts  All Forums:Forum Nav: