Home Theater Forum › Home Theater Forum › Home Theater Hardware › Beginners, General Questions & HTiB (Home Theater in a Box) › AUDIO-IN plug inn problem in my Sony DAV-HDX466 Home theatre receiver...
New Posts  All Forums:Forum Nav:

AUDIO-IN plug inn problem in my Sony DAV-HDX466 Home theatre receiver...

post #1 of 5
1/31/12 at 10:06pm
Thread Starter 
Hi,

My Home Theatre recievers AUDIO-IN plug-inns yellow and white analog audio plug-inns are not working if Im using the external source i.e., Blue-ray player or Media Player. I can hear the home theatre audio if I use any DVD disc in my receiver only DAV HDX466. The other day when I was watching the movie from my Boxee Media Player, the HDMI cable from Boxee connected to TV and the Analog cable of Audio-out of Boxee to Audio-in of HTS. But I couldn't able to hear any sound from HTS except from TV. However if I put any DVD in my HTS, then there is no problem in audio from HTS. Please let me know what could be the problem in my HTS receiver's AUDIO-INN plug-inns? I even tested with new A/V wires, but still the problem persists. I had a on-line chat with Sony support team and they said, the receiver need to be tested physically. My question is, can I use the Multimeter externally to test Audio-in plug-inns, IF SO PLEASE LET ME HOW TO TEST IT? OR is there any other way to test it? OR is there any concerned IC could have failed? Please find me the solution. Should you have any questions please do not hesitate to contact me.

Thank you,

Regards,

PUBBY.
Reply
post #2 of 5
2/1/12 at 4:02am
Pubby, I'm having a hard time figuring out what devices you have connected, and what type of connection each device has. Maybe someone else will have better luck (I'm usually not the best at decyphering), but in the meantime, maybe this will help - you mentioned audio yellow and white plugs. Yellow is typically not an audio port. Audio is usally red/white for stereo, or orange for digital coax. Yellow is a composite video port (and a low resolution one at that). Maybe you are cross-connecting video and audio.
Reply
post #3 of 5
2/1/12 at 4:03am
Have you set the external devices to output analog audio? They might have digital audio as the default audio output. BTW, yellow is a video connection. The analog connections are red and white smile.gif . Good morning Al. Came in second again. And always less than a minute!
Reply
post #4 of 5
2/1/12 at 4:26am
Don't feel bad Gene, it's the quality of the post, not the speed or length. Plus, I'm sure you have a great personality ...

It was close though, you almost caught Robert and I between shifts.

(Seriously, if it makes you feel any better, I think I lead the board in the category 'last post where the OP never returns'.)
Reply
post #5 of 5
2/1/12 at 6:26am
Thread Starter 
Hi Andreson, I'm sorry for confusion. I actually connected red and white cables which are meant for audio. The devices I'm talking about are external sources like blueray player or media player to HTS.
Pubby.
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Home Theater Forum › Home Theater Forum › Home Theater Hardware › Beginners, General Questions & HTiB (Home Theater in a Box) › AUDIO-IN plug inn problem in my Sony DAV-HDX466 Home theatre receiver...