Home Theater Forum › Home Theater Forum › Home Theater Hardware › Speakers and Subwoofers › How do I do wireless audio?
New Posts  All Forums:Forum Nav:

How do I do wireless audio?

post #1 of 2
1/26/12 at 7:45am
Thread Starter 
Hi all, here's my dilemma:

I am putting up a new projection system with a 10" diagonal screen. I've already picked out and ordered the components, but in already built room I need a way to get the audio from the rear of the room to the front wirelessly. I have a couple Denon receivers, so I was thinking I could have one in the rear to accept the audio signal and one in the front to run the speakers. Is there a way to send the audio from one receiver to the other wirelessly?

Any thoughts or suggestions are appreciated!
Reply
post #2 of 2
1/26/12 at 3:18pm
Your best bet is something with a separate transmitter (that plugs into the AVR’s pre-outs) and receiver (that plugs into a remote amplifier’s inputs). Here are some links (haven’t checked these in a while to see if they still work). Keep in mind that these units will likely not have audiophile specs, so expect to see limited frequency range and increased noise.


http://www.hardwarezone.com/articles/view.php?id=1249&cid=9&pg=1

From Radio Shack:
Transmitter
http://www.radioshack.com/product/index.jsp?productId=2049805

Receiver/amp for above
http://www.radioshack.com/product/index.jsp?productId=2049804

Transmits a wireless signal across the room:
http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=330515&is=REG&addedTroughType=search
http://www.buy.com/prod/rf-link-avs-5811-5-8ghz-audio-and-video-transmission-system-with-ir/q/loc/111/90136191.html

http://www.google.com/search?sourceid=navclient&ie=UTF-8&rls=GGLJ,GGLJ:2006-37,GGLJ:en&q=Rocketfish+RF%2dWHTIB


Regards,
Wayne A. Pflughaupt


Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Speakers and Subwoofers
Home Theater Forum › Home Theater Forum › Home Theater Hardware › Speakers and Subwoofers › How do I do wireless audio?