Home Theater Forum › Home Theater Forum › Home Theater Hardware › Speakers and Subwoofers › Help from Paradigm PDR-10 Owners
New Posts  All Forums:Forum Nav:

Help from Paradigm PDR-10 Owners

post #1 of 7
1/25/12 at 9:35am
Thread Starter 
I have a PDR-10 v.3 that has a resistor that is fried beyond identification. Can anyone tell me what the coding is on R101? Haven't heard back from Paradigm. Transistor is also bad, but we know what that one is.
Reply
post #2 of 7
1/30/12 at 6:09am
Thread Starter 
Anyone? Still no response from Paradigm after 2 weeks.
Reply
post #3 of 7
2/14/12 at 7:38am
Thread Starter 
Does anyone have a PDR-10 at all? At this point I'd be willing to check against any version rather than trying to lock it down to just v3.

Just frustrated as this is my second PDR-10 in about 7 years and I far from abuse it. Still have monitors from Paradigm that I bought back in '93 or so.
Reply
post #4 of 7
2/14/12 at 12:24pm
Check with a local Paradigm dealer. They may have better luck getting in touch with the factory.
Reply
post #5 of 7
2/14/12 at 12:28pm
Thread Starter 
Quote:
Originally Posted by John Garcia View Post

Check with a local Paradigm dealer. They may have better luck getting in touch with the factory.

They are the ones that tried to get the info for me. They just told me today that they are getting no where with them.
Reply
post #6 of 7
2/14/12 at 1:07pm
How about direct?

http://www.paradigm.com/contact-us/contact-us
Reply
post #7 of 7
2/26/12 at 1:14am
Hi,
I've opened up my PDR-10 and R101 and R102 are the same at 620 ohms and they look rated at about 1 watt.
Hope this helps.
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Speakers and Subwoofers
Home Theater Forum › Home Theater Forum › Home Theater Hardware › Speakers and Subwoofers › Help from Paradigm PDR-10 Owners