New Posts  All Forums:Forum Nav:

HD1000u

post #1 of 12
7/4/09 at 11:06am
Thread Starter 
So as you can see this is my first post here so thanks to anyone that can help.

when is setup my 1000u in my new house it seems that the picture is just barely there.  This room is darker than the last room but the picture is so dim.  I have made all adjustments to the projector but no help.  The lamp has alot of hours.  As the lamp wears down will the picture begin to fade, or is the lamp like light bulbs where it is either on or off. 

Thanks..

Cameron
Reply
post #2 of 12
7/4/09 at 12:08pm
All lamps fade over time.  It happens so gradually that it's not usually noticed.
Reply
post #3 of 12
7/4/09 at 5:31pm
I also have the HD1000. How many hours do you have on it? You can try a few things. 1) Make sure Setup is set to "Off". 2) Change gamma to "High Brightness". Both of these things will give you more brightness.  After making these changes re-calibrate. If it's still too dim, 3) Change lamp to high power mode and re-calibrate. But the high lamp mode will be louder. If these things don't help enough, you need a new bulb.
Reply
post #4 of 12
7/4/09 at 10:40pm
Thread Starter 
how do I change the lamp to high power mode?  I do not see it in the menu options.
Reply
post #5 of 12
7/5/09 at 10:01am
consult your user manual ??
Reply
post #6 of 12
7/6/09 at 11:36am
Thread Starter 
In the manual it mentions regular mode and economy mode.  Nowhere does it mention a high power mode.  I was hoping someone knew something that I didn't. 
Reply
post #7 of 12
7/6/09 at 5:07pm
Sorry, I worded it wrong. "Standard" is high power mode.
Reply
post #8 of 12
7/6/09 at 10:18pm
Thread Starter 
ok cool.  so it is just time for a new lamp.  I have never had a projector before and didnt know if the lamp had gone bad or not.  Thanks for the help...

Cameron
Reply
post #9 of 12
7/6/09 at 11:44pm
How many hours are on the bulb? Did you try the suggestions I made? Are you currently using the bulb in standard mode?
Reply
post #10 of 12
7/9/09 at 9:25pm
Thread Starter 
I have the bulb in standard mode...  I checked to make sure that setup was off and made sure that calibration was good.  The bulb has about 1600 hours on it.  I know its getting close to dying but I wasnt sure if the lamp faded with hours.  I figured a light bulb burns at full capacity until it burns out so maybe the same for projector lamps..   I dont want to spend 400 on a new lamp if that is not the problem.   Does anyone know of a good place to buy lamps?


Reply
post #11 of 12
7/10/09 at 8:15pm
Your situation is very surprising to me. I've got about 1700 hours on my HD1000, and I still use it in low power mode, cinema gamma. My room is painted very dark, and all lights off when I use projector. Do you have an ambient light problem? Is your room a light color?
Reply
post #12 of 12
7/11/09 at 6:05pm
Thread Starter 
The room is very dark and all the walls are painted dark...  The projector was packed away in a box for about 6 months, when I set it up in my new house is when i noticed how dim everything has become.  It really looks terrible. 
Reply
New Posts  All Forums:Forum Nav:
  Return Home