New Posts  All Forums:Forum Nav:

FS: Calibration tool - i1 pro

post #1 of 5
5/14/09 at 10:04am
Thread Starter 
I have an i1 pro that I used HCFR on my Sharp Aquos and Samsung HL-61A750, but find that my eye isnt discerning enough to justify keeping it around for spot calibrations.

Here is the i1 Diagnostics output:

General Information
Date and Time: 5/14/09 10:46 AM
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.5 Build 70
Platform: Apple Mac OS X 10.5.7 (9J61) i386

  Device type: i1Pro (NO filter) [ Emission  Reflectance  Reflectance Scan ]
  Firmware version: 101
  CPLD version: 101
  Dark measurement count: 1285
  Lamp burning time: 662.858 seconds
  Spot measurement count: 869
  Scan measurement count: 31

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Failed





No software included, but has the white tile base, USB cable, and hanger strap.

I know they are somewhat sought after, and are still somewhat expensive (if you can find one new), but I am thinking $400.

Let me know if you would like some pics, or more info.
Edited by thminn - 12/3/09 at 6:44am
Reply
post #2 of 5
5/15/09 at 8:59pm

Re: FS: Calibration tool - i1 pro

can I get pictures and more info on the unit...I am interested.
I would like to know what Rev. the unit is..ie..A,B,C or D

I have PMed you my number...please give me a call.

Thanks
RayJr
Reply
post #3 of 5
5/17/09 at 7:41am
Thread Starter 

Re: FS: Calibration tool - i1 pro

Here are a couple of pics

It is a Rev. A

Also, price drop to $350, to see if it sparks any more interest.

Thanks!




Reply
post #4 of 5
11/30/09 at 9:43am
i'm interested for $350 (if you still have it)

 mark

markkaye@avfusion.ca
Reply
post #5 of 5
12/3/09 at 6:43am
Thread Starter 
Here is what I sent to Mark, and it also still works fine in ColorHCFR

Quote:
I do still have it, but since I posted, it has started failing reflectance drift calibration in i1 Diags.
 
I dont use it for anything printed, so this doesnt bother me, but thought I should let you know.
 
I just ran a monitor calibration in i1 match, and it's white tile calibration passed, and it successfully created a new icc profile, so for monitor/display calibration, it should work fine if that is all you intend to use it for.
 
If you are interested, I can knock another $50 off, since it now has this problem?


If anyone else is interested at $300 shipped, please let me know.
Reply
New Posts  All Forums:Forum Nav:
  Return Home