New Posts  All Forums:Forum Nav:

hdmi feedback to dish dvr reciever

post #1 of 3
Thread Starter 
Hello
Has anyone ever heard of this problem and perhaps know of a solution. I have a new lg tv. It is hooked up to dish network. When I use the hdmi to connect the two I get a popping noise when changing channels and even while watching a program. Dish has been out 4 times and have changed out everything including the box all 4 times. By a process of elimination I have figured it is due to the connection with hdmi. It is now connected by avi and am not having a problem. Any help would be greatly appreciated.

Thank you
Gary
post #2 of 3

Re: hdmi feedback to dish dvr reciever

Hi Gary. Welcome to HTF.

I have not heard of this problem with HDMI as it is a digital connections and should NOT cause a popping sound. There is often a break in the sound when switching channels but not usually a popping sound.

I suspect the problem may be in the software inside the LG television. Check your owners manual to see if there is a way to upgrade the firmware. Just because you just bought the tV does not mean it has the latest software to handle HDMI. A USB port is often on newer televisions and you use a USB Drive to update things.

Give that a shot.

Another idea: HDMI has to 'handshake' and perhaps having a receiver between the Dish box and the TV might prevent the popping sound as the receiver will simply pass on the video but strip off the sound to feed it's speakers. Saddly this is an expensive thing to try but it has been known to solve some HDMI problems.
post #3 of 3

Re: hdmi feedback to dish dvr reciever

I had that same problem with my cable and hdtv yesterday because I temporarily borrowed the component cables for another system.
When I reinstalled the cables I must have plugged it into the wrong outlet and it was popping everytime I changed channels. When I changed audio connections the noise went away
New Posts  All Forums:Forum Nav: