I purchased the pair of amplifiers to extend my theatre into the rest of the house, a project I never completed. I have one of the original boxes, the other box is MIA. Both amplifiers are working, and have been powered on to test. I will include power cable and amplifier only-- no manuals or additional cables/support.
These are amazing amplifiers if you want to do Dolby 9.1 or other configuration. I am asking $100 for each of the amplifiers plus the cost of shipping. Shipping will be determined by weight and your zip code (shipping UPS need to ship traceable for your/mine benefit).
I will not be monitoring this forum on a daily basis so please email me (no PMs or IMs please). I will check in each week to see any posts.
Thanks,
Jerry
jeromejwetzel@yahoo.com
The PA2000 gives you high performance sound with the flexibility for home theater or multiroom operation! It can be used in four channel mode so that you can have two separate multiroom stereo systems or the four channels can be bridged into two supercharged channels for maximum power! And if your 5.1 channel surround system has 7.1 channel outputs, you can even use the PA2000 to upgrade to 7 channel operation!
Features
Power Output, Normal Mode: 4 x 45 Watts @ 8 ohms, 20Hz - 20kHz, <0.07% THD, all channels driven
Power Output, Bridged Mode: 2 x 100 Watts @ 8 ohms, 20Hz - 20kHz, <0.07% THD, all channels driven
High Instantaneous Current Capability (HCC): 45 Amps
Frequency Response: <1Hz - 170kHz (-3dB at 1 watt)
Signal-to-Noise Ratio: 110dB at Rated power 45 watts
THD/IMD: Less than 0.07% at rated output
Power Bandwidth: <1Hz - 100kHz
Input Impedance: 47k Ohms
Input Sensitivity: 1 Volt for rated output
Dimensions
(H x W x D): 6-1/8-Inches x 17-3/8-inches x 15-3/4-Inches (155mm x 442mm x 400mm)
Weight: 25.3 lb (11.4kg)
Warranty: 2 years parts and labor
Line-level outputs for daisy-chaining amplifiers
Automatic turn-on connections
Variable output level controls
Gold-plated, 5-way binding-post speaker terminals
Insider Tips:
The PA 2000 is a wide-bandwidth design, which means it will more effortlessly replay upper treble and lower bass. It is also a high current design, which gives it greater control over bass than competing models. It also features discrete output devices instead of cheaper integrated circuits--which is a sign of quality. These features tell more about the sonic output capability than does mere wattage--i.e.., a wide-bandwidth, high-current, discrete output design will produce more clarity, better bass, greater dynamics and superior speaker control than competing designs that have even double the rated wattage.
Tech Specs
Product Type - Amplifier
Dimensions (WxDxH) / Weight - Amplifier : 17.4 in x 15.7 in x 6.1 in / 25.1 lbs
Width - 17.4 in
Depth - 15.7 in
Height - 6.1 in
Weight - 25.1 lbs
Sound Output Mode - Stereo
Response Bandwidth - 1 - 170000 Hz
Signal-To-Noise Ratio - 110 dB
Input Impedance - 47 kOhm
Input Sensitivity - 1 V
Amplifier Output Details - 45 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.07% - 4 channel(s) ( main ) 100 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.07% - 2 channel(s) ( main )
Additional Features - Auto power on/off, dual volume control
Connector Type - 1 x audio line-in ( RCA phono x 2 ) - rear 1 x audio line-out ( RCA phono x 2 ) - rear 1 x trigger - rear 4 x speakers output ( banana/spade x 2 ) - rear
Power Device - Power supply - internal
Voltage Required - AC 120 V ( 50/60 Hz )
Power Consumption Operational - 260 Watt
These are amazing amplifiers if you want to do Dolby 9.1 or other configuration. I am asking $100 for each of the amplifiers plus the cost of shipping. Shipping will be determined by weight and your zip code (shipping UPS need to ship traceable for your/mine benefit).
I will not be monitoring this forum on a daily basis so please email me (no PMs or IMs please). I will check in each week to see any posts.
Thanks,
Jerry
jeromejwetzel@yahoo.com
The PA2000 gives you high performance sound with the flexibility for home theater or multiroom operation! It can be used in four channel mode so that you can have two separate multiroom stereo systems or the four channels can be bridged into two supercharged channels for maximum power! And if your 5.1 channel surround system has 7.1 channel outputs, you can even use the PA2000 to upgrade to 7 channel operation!
Features
Power Output, Normal Mode: 4 x 45 Watts @ 8 ohms, 20Hz - 20kHz, <0.07% THD, all channels driven
Power Output, Bridged Mode: 2 x 100 Watts @ 8 ohms, 20Hz - 20kHz, <0.07% THD, all channels driven
High Instantaneous Current Capability (HCC): 45 Amps
Frequency Response: <1Hz - 170kHz (-3dB at 1 watt)
Signal-to-Noise Ratio: 110dB at Rated power 45 watts
THD/IMD: Less than 0.07% at rated output
Power Bandwidth: <1Hz - 100kHz
Input Impedance: 47k Ohms
Input Sensitivity: 1 Volt for rated output
Dimensions
(H x W x D): 6-1/8-Inches x 17-3/8-inches x 15-3/4-Inches (155mm x 442mm x 400mm)
Weight: 25.3 lb (11.4kg)
Warranty: 2 years parts and labor
Line-level outputs for daisy-chaining amplifiers
Automatic turn-on connections
Variable output level controls
Gold-plated, 5-way binding-post speaker terminals
Insider Tips:
The PA 2000 is a wide-bandwidth design, which means it will more effortlessly replay upper treble and lower bass. It is also a high current design, which gives it greater control over bass than competing models. It also features discrete output devices instead of cheaper integrated circuits--which is a sign of quality. These features tell more about the sonic output capability than does mere wattage--i.e.., a wide-bandwidth, high-current, discrete output design will produce more clarity, better bass, greater dynamics and superior speaker control than competing designs that have even double the rated wattage.
Tech Specs
Product Type - Amplifier
Dimensions (WxDxH) / Weight - Amplifier : 17.4 in x 15.7 in x 6.1 in / 25.1 lbs
Width - 17.4 in
Depth - 15.7 in
Height - 6.1 in
Weight - 25.1 lbs
Sound Output Mode - Stereo
Response Bandwidth - 1 - 170000 Hz
Signal-To-Noise Ratio - 110 dB
Input Impedance - 47 kOhm
Input Sensitivity - 1 V
Amplifier Output Details - 45 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.07% - 4 channel(s) ( main ) 100 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.07% - 2 channel(s) ( main )
Additional Features - Auto power on/off, dual volume control
Connector Type - 1 x audio line-in ( RCA phono x 2 ) - rear 1 x audio line-out ( RCA phono x 2 ) - rear 1 x trigger - rear 4 x speakers output ( banana/spade x 2 ) - rear
Power Device - Power supply - internal
Voltage Required - AC 120 V ( 50/60 Hz )
Power Consumption Operational - 260 Watt
