Home Theater Forum › Home Theater Forum › Home Theater Hardware › Receivers/Separates/Amps › Need help setting up HD audio
New Posts  All Forums:Forum Nav:

Need help setting up HD audio

post #1 of 7
3/12/09 at 9:34am
Thread Starter 
I'm sure I have a setting wrong, I have a HDMI connection from a Panasonic DMP-BD35 to a Denon AVR-3808CI. Both can decode Dolby Digital TrueHD and DTS-HD Master audio formats. The problem I'm having is that when I select these formats on the disc the receiver just outputs Dolby Digital or DTS.

On my player I have both formats set to output as Bitstream - Is this right? What else do I need to look at? I have searched through similar posts but nothing that really tells me why this isn't working.
Reply
post #2 of 7
3/12/09 at 10:46am

Re: Need help setting up HD audio

Hi Josh,

Make sure secondary audio is off on your BD35.
Reply
post #3 of 7
3/12/09 at 10:50am
Thread Starter 

Re: Need help setting up HD audio

The secondary audio is off and the receiver still doesn't output HD audio.
Reply
post #4 of 7
3/12/09 at 12:08pm

Re: Need help setting up HD audio

Not sure how your Denon works, but with my Onkyo there is a setting called "HDMI Audio Out". This setting allows the audio to passed through the AVR to the TV. When enabled, The BD player pick up on the TV's capabilities and uses only the old formats (since that is all my TV understands). I bet the Denon has a similar setting.
Reply
post #5 of 7
3/12/09 at 12:57pm
Thread Starter 

Re: Need help setting up HD audio

Thanks for your replies, I'll check this out tonight. I only have a component connection to my Sony projector, there is no audio connections beyond the AVR. But the AVR is more complicated than I'm used to, so I'll check around and see what I can change regarding HDMI out.
Reply
post #6 of 7
3/12/09 at 9:58pm
Thread Starter 

Re: Need help setting up HD audio

I couldn't find any "HDMI Audio Out" option or an equivalent. Any other ideas that I can try?
Reply
post #7 of 7
3/13/09 at 5:14am

Re: Need help setting up HD audio

Is the receiver's mode set to "Standard"? (Pg. 40 of manual)
Good luck!
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Receivers/Separates/Amps
Home Theater Forum › Home Theater Forum › Home Theater Hardware › Receivers/Separates/Amps › Need help setting up HD audio