New Posts  All Forums:Forum Nav:

need help with eq. compatibility

post #1 of 3
2/8/09 at 2:02pm
Thread Starter 
I have an onkyo tx-806 receiver and a optoma hd71 projector. when I connect the projector to the receiver via hdmi the picture is only colors and lines however if I bypass the receiver (cable box to projector via hdmi) the picture is fine. At first I thought the receiver was the problem, but then I connect the receiver to a tv via hdmi the picture is fine. Now check this out when I connect the projector to the receiver via component video to the picture is fine. I have been going back and fort with this including talking to both equipment manufactures and their pointing the finger at the other one. The hdmi will not work from the receiver to the projector so can the two just not be compatible with hdmi video ? Any suggestions will be appreciated
I need help from the real experts.
thanks
Reply
post #2 of 3
2/9/09 at 5:16pm

Re: need help with eq. compatibility

hi
you are having a "hand shake" problem.
You need to experiment with turning the devices on, to find out which order will work best for you.

Off the top of my head, I would try the receiver on first, then the display, then the source. Your mileage may vary.

Good luck!!
Reply
post #3 of 3
2/12/09 at 4:37am
Thread Starter 

Re: need help with eq. compatibility

Thanks Gregg,
Still no joy, anymore ideas ? anyone !
Reply
New Posts  All Forums:Forum Nav:
  Return Home