Home Theater Forum › Home Theater Forum › Home Theater Hardware › Receivers/Separates/Amps › Issue with Denon 2307CI - can't reinitialize the processor
New Posts  All Forums:Forum Nav:

Issue with Denon 2307CI - can't reinitialize the processor

post #1 of 9
4/8/08 at 9:13am
Thread Starter 
My buddy's Denon 2307CI recently got popped by a power surge (despite being hooked up to a Panamax protector) and since then, some of the assignable inputs on the receiver went a little screwy ie. what used to be TV/SAT is now CDR/TAPE. Anyway, to remedy this, I suggested we reboot/reinitialize the processor. From what I recall, in the manual Denon suggests holding down the Speaker A and B buttons and pressing the "soft" power button. We tried this multiple times and nothing happened. Any suggestions on how to accomplish this?

PS- Other than the input naming, the receiver works without any problems.
Reply
post #2 of 9
4/8/08 at 12:46pm

Re: Issue with Denon 2307CI - can't reinitialize the processor

did you look at the manual, or just trying to remember? I had a receiver do the same thing at one point, but it involved unplugging for 10 minutes, then plugging it in and doing the reset button combo. But mine reset ALL of the memory, like how it was calibrated and everything. It wasn't a denon though (I have a denon now and fortunately nothing has ever happened like that)
Reply
post #3 of 9
4/9/08 at 9:13am
Thread Starter 

Re: Issue with Denon 2307CI - can't reinitialize the processor

Nope, this is straight from the manual. I can try the unplug/reset thing though. I was going to unplug it and try initially, but figured I'd post here first.
Reply
post #4 of 9
4/9/08 at 10:02am

Re: Issue with Denon 2307CI - can't reinitialize the processor

When you say "soft" power button are you talking about the standby or the actual power button. You have turn the unit of first then hold A/B and push in the power button to turn it on. When the screen flashes release the buttons. Give it another shot.
Reply
post #5 of 9
4/10/08 at 9:07am
Thread Starter 

Re: Issue with Denon 2307CI - can't reinitialize the processor

Quote:
Originally Posted by Kevin. W
When you say "soft" power button are you talking about the standby or the actual power button. You have turn the unit of first then hold A/B and push in the power button to turn it on. When the screen flashes release the buttons. Give it another shot.

Yeah, by soft I meant the standby button. So, turn the unit completely off (depress the MAIN power button), hold speaker A+B, then push in the MAIN power button?
Reply
post #6 of 9
4/10/08 at 2:32pm

Re: Issue with Denon 2307CI - can't reinitialize the processor

If problems appear after a surge, ALWAYS unplug the unit for several minutes before trying anything else.

turning it off does not do the same thing. Then, if that doesn't help, do the restart.
Reply
post #7 of 9
4/14/08 at 8:09am
Thread Starter 

Re: Issue with Denon 2307CI - can't reinitialize the processor

Quote:
Originally Posted by JohnRice
If problems appear after a surge, ALWAYS unplug the unit for several minutes before trying anything else.

turning it off does not do the same thing. Then, if that doesn't help, do the restart.

Will do...thanks, John! I should've known to do that...momentary lapse due to beer consumption.
Reply
post #8 of 9
4/17/08 at 1:59pm

Re: Issue with Denon 2307CI - can't reinitialize the processor

Ron, did you get the issue cleared up? You do have to push the main power button, not standby.
Reply
post #9 of 9
4/21/08 at 10:33am
Thread Starter 

Re: Issue with Denon 2307CI - can't reinitialize the processor

Quote:
Originally Posted by Kevin. W
Ron, did you get the issue cleared up? You do have to push the main power button, not standby.

Kevin,

I sure did, thanks! I held down the speaker A+B buttons, hit the main power button and voila, it worked.
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Receivers/Separates/Amps
Home Theater Forum › Home Theater Forum › Home Theater Hardware › Receivers/Separates/Amps › Issue with Denon 2307CI - can't reinitialize the processor