Home Theater Forum › Home Theater Forum › Home Theater Hardware › Blu-ray, DVD, LD, Tivo, Satellite and Other Playback Devices  › a2 audio question. hdmi audio while using component for video?
New Posts  All Forums:Forum Nav:

a2 audio question. hdmi audio while using component for video?

post #1 of 7
7/28/07 at 2:30pm
Thread Starter 
Even though i'm not using the a2's hdmi for the video signal, can I use the a2's hdmi on a compatable surround receiver for the audio while using the a2's components for my projector? If not, then my only option for digital surround would have to be the optical out on the hd-a2 I assume. Can someone clarify. The a2 is awesome by the way on my 7ft wide screen.

Tim
Reply
post #2 of 7
7/28/07 at 7:02pm

Re: a2 audio question. hdmi audio while using component for video?

Quote:
Originally Posted by tknapp
Even though i'm not using the a2's hdmi for the video signal, can I use the a2's hdmi on a compatable surround receiver for the audio while using the a2's components for my projector? If not, then my only option for digital surround would have to be the optical out on the hd-a2 I assume. Can someone clarify. The a2 is awesome by the way on my 7ft wide screen.

Tim

I'm doing this right now, but there's a catch. When you view regular DVD's, the HDMI audio is inactive, so you have to switch your receiver from the HDMI in to the optical. It's a pain, but it's only temporary until I decide on my new TV.
Reply
post #3 of 7
7/28/07 at 7:31pm
Thread Starter 

Re: a2 audio question. hdmi audio while using component for video?

Thanks for the reply Jeff. Having a just old enough projector without hdmi kind of complicates things. Glad to know that I can do this though. Time to pin down a reciever then.

Tim
Reply
post #4 of 7
11/23/09 at 11:45am
I've got a situation that's a bit reversed from the OP.

I've got an older Sony entry-level receiver (no HDMI) and am looking to get a new LCD display (with HDMI).

The peripherals in-play are a Panny BD-10 and a Dish Network box (both with HDMI out).

I figured I would run HDMI from each device to the new display (to get optimal video)...but still use the BD player's 5.1 analog outs and the optical out for the Dish box (for best audio). 

Will that work?  The BD player and Dish box won't get funky once an HDMI cable is plugged in...thinking that's the way the audio will be fed.  Will they? 

Does anyone else have devices set up in similar fashion? 
Reply
post #5 of 7
11/23/09 at 12:36pm
Prior to buying my entry level Sony receiver with HDMI, this was how I ran my Toshi HD-A30 (HDMI to lcd, optical to receiver). It works well, but I found there was a delay on the HDMI audio, which was passed through to my LCD regardless of what configuration I used on my HDMI, so I would just mute the LCD.
Reply
post #6 of 7
11/23/09 at 8:25pm
Quote:
I figured I would run HDMI from each device to the new display (to get optimal video)...but still use the BD player's 5.1 analog outs and the optical out for the Dish box (for best audio). 
 

Mike, you may have to go into the BD-10's setup menu and set hdmi audio to "Off". Some BR players will only output audio thru one output at a time.
Reply
post #7 of 7
11/23/09 at 8:43pm
Thanks, fellas.  I figured I couldn't be the only one with an odd hodge-podge of new & old gear.

That's good info, Gene.  I have a very limited knowledge of HDMI but have heard that it carries both video & audio...so was worried that the sources might balk at sending more than one audio signal at a time.  Wonder if I might have to do the same for the Dish box...

Thanks. 
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Home Theater Forum › Home Theater Forum › Home Theater Hardware › Blu-ray, DVD, LD, Tivo, Satellite and Other Playback Devices  › a2 audio question. hdmi audio while using component for video?