Home Theater Forum › Home Theater Forum › Home Theater Hardware › Hi-Def Source Hardware (Players, STB and Cable Boxes, Antennas etc) › Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output
New Posts  All Forums:Forum Nav:

Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output - Page 2

post #31 of 126
8/25/06 at 6:30am

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

The "official" 2.0 firmware is available NOW for download from Toshiba, if your player is connected to the internet... I just upgraded mine to v2.0... took about 40 or so minutes.

Downloading an "unofficial" firmware release, in my opinion anyway, isn't recommended... just get the real thing.

Haven't played anything yet since the firmware upgrade... gotta get to work...
Reply
post #32 of 126
8/25/06 at 6:33am

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Quote:
Originally Posted by JeffdDurborow
i haven't done any of the firmware upgrades i believe my unit was manuf. in june.. i am a bit nervous to upgrade..can you revert back if you have any problems??

I don't know about 2.0, but the previous releases can be undone. You can install 1.4, and if you don't like it reinstall 1.2.
Reply
post #33 of 126
8/25/06 at 2:53pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

I downloaded the beta 2.0 and burned to CD-R. When inserted into the Toshiba the disc loaded and was recognized as a CD then "NO PLAY" scrolled across the front panel. What went wrong?
Reply
post #34 of 126
8/25/06 at 3:43pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Any news on upgrading the RCA HDV5000 to 2.0?
Does Toshiba send out an upgrade disc?
Would that work on the RCA model?
Thanks for any information.
Reply
post #35 of 126
8/25/06 at 6:05pm
Thread Starter 

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Quote:
Any news on upgrading the RCA HDV5000 to 2.0?
Does Toshiba send out an upgrade disc?
Would that work on the RCA model?
Yes, the firmware works on the RCA HDV5000. The firmware will preserve the branding info as well -- it recognizes whether you have the Toshiba or the RCA.
Reply
post #36 of 126
8/25/06 at 9:43pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

did the official update.
now tell me again how do i check the fw version
Reply
post #37 of 126
8/25/06 at 10:44pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Quote:
Originally Posted by TonyD
did the official update.
now tell me again how do i check the fw version

Apparently, you pop in Phantom or Training Day, select the Dolby True HD track, and prepare to be blown away.

- Steve
Reply
post #38 of 126
8/25/06 at 11:49pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Ken F:

When I tried to update my RCA it said it was already updated but the number on the left was still 1.4 (RCA had sent me the disc) so for some reason it's not working and I don't know what to do.
Thanks
Reply
post #39 of 126
8/25/06 at 11:50pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Ken F:

It also said when I put in a disc with Tru HD sound that my player doesn't have that.
Reply
post #40 of 126
8/26/06 at 7:19am

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Quote:
Originally Posted by Roger Mathus
I downloaded the beta 2.0 and burned to CD-R. When inserted into the Toshiba the disc loaded and was recognized as a CD then "NO PLAY" scrolled across the front panel. What went wrong?

That happened to me when I used "Nero / Make Data Disc"

I made another CD-R using "Nero / Burn Image to Disk" and that worked!!!


Quote:
Originally Posted by Don May Jr
The "official" 2.0 firmware is available NOW for download from Toshiba, if your player is connected to the internet... I just upgraded mine to v2.0... took about 40 or so minutes.

Downloading an "unofficial" firmware release, in my opinion anyway, isn't recommended... just get the real thing.

Haven't played anything yet since the firmware upgrade... gotta get to work...


FYI: It's been confirmed @ AVS that the download file @ RapidShare and the Toshiba Official 2.0 Firmware Update** IS IDENTICAL, both Versions read ...

2.0/1.0A/2.0S

So, choose your upgrade path option,

1) Ethernet
2) Wait for the CD from Toshiba
3) RapidShare download (option I used)


I must agree with others that have upgraded already, Dolby TrueHD 5.1 Does Sound Glorious playing "The Phantom of the Opera"!!! (my only HD DVD w/TrueHD at the moment )

So far, the slight pause that I've seen in the past w/a couple of my HD DVDs, ... is just that, ... a thing in the past! Thank YOU Toshiba!!!

**NOTE: RapidShare: "You have requested the file 2.0firmware.nrg (59324 KB). This file has been downloaded 1220 times already." (7:19am PST)

Phil
Reply
post #41 of 126
8/26/06 at 8:01am
Thread Starter 

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Mark,

It turns out that the network / Internet update for firmware 2.0 hasn't yet been enabled for the RCA HD-DVD players. It should be in the next week or so.

If you don't want to wait,you can download the firmware to a CD and update that way.
Reply
post #42 of 126
8/26/06 at 8:51am

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Somehow I thought before this firmware upgrade that TrueHD was only for 7.1 setups. I'm an idiot.

Glad to hear members report on Phantom's sound mix.
Reply
post #43 of 126
8/26/06 at 9:51am

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Ken F:

Where exactly do I go to do that and how?
Thanks much, I really appreciate the help!

Mark
Reply
post #44 of 126
8/26/06 at 10:49am

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

LOL.

MarkA: Phil I. just gave you the answer to your question in his post #40, immediately preceding your asking.
Reply
post #45 of 126
8/26/06 at 11:56am

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Ok, I've downloaded the 2.0 but the True HD sound is not as good as the Dolby Digital 5.1.
Do I need a receiver with an HDMI input to get True HD sound?
Thanks once again.
Reply
post #46 of 126
8/26/06 at 12:02pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Quote:
Originally Posted by MarkA
Ok, I've downloaded the 2.0 but the True HD sound is not as good as the Dolby Digital 5.1.
Do I need a receiver with an HDMI input to get True HD sound?
Thanks once again.
As long as your receiver has 5.1 discrete analog inputs, properly calibrated with the speaker settings in your player and receiver, you are covered.

I doubt the player-generated DTS signal over toslink would work as well.

- Steve
Reply
post #47 of 126
8/26/06 at 1:11pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

FYI:

Warning to those when using the 2.0 software with a video processor and certain displays/projectors: There are reported issues with this v2.0 software!

HDCP and DVI issues are being reported with the Toshiba A1 v2.0, when used in conjunction with a video processor like the Lumagen and displays/front projectors like the Sony Ruby.

Currently, the changes will be permanent: (i.e. You cannot install a past version to go back/correct it.

For those that may have a concern: http://www.avsforum.com/avs-vb/showt...&&#post8287140
Reply
post #48 of 126
8/26/06 at 6:39pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

I have yet to peform the udpate, I will probably do it next week when I have time. Is there really an increase in the quality of sound over DD+? I will try POTO after I do it to see for myself, but wondering about others. I havent purchased or watched Training day yet so I wouldnt have a comparison.
Reply
post #49 of 126
8/26/06 at 6:59pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

I say POTO is more vibrant and robust during the songs. Played Constantine again, and while the surrounds seem clearer, I was not impressed as much as with POTO. Now, to check out The Perfect Storm...
Reply
post #50 of 126
8/26/06 at 7:04pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Oooh, I have yet to watch my copy of Perfect Storm, didn't know it had True HD.
Reply
post #51 of 126
8/26/06 at 10:11pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Did the update and played Phantom Of The Opera. In True HD experienced many sound dropouts not noted before on this disc. I am using Theta processor. No problem with Training Day.
Reply
post #52 of 126
8/27/06 at 12:26pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Quote:
Originally Posted by Steve Tannehill
Apparently, you pop in Phantom or Training Day, select the Dolby True HD track, and prepare to be blown away.

- Steve
did that with phantom and , not blown anywere.

sound is lower then standard DD track.

is there a way to check player for fw ver?
Reply
post #53 of 126
8/27/06 at 12:42pm
Thread Starter 

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Quote:
Did the update and played Phantom Of The Opera. In True HD experienced many sound dropouts not noted before on this disc. I am using Theta processor. No problem with Training Day.
Be sure to clean the disk / wipe off smudges.

Note again you need to use either HDMI or 5.1 analog output to experience TrueHD -- you also have to select the TrueHD 5.1 track in setup. If you are using 5.1 analog input and your receiver/amp doesn't have an analog bypass mode, then it may be degrading the audio signal with an extra A/D step.

Quote:
is there a way to check player for fw ver?

Setup -> Maintenance -> Update

Before you commit to an update the current version number will be visible on-screen.
Reply
post #54 of 126
8/27/06 at 1:11pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

found a topic at avs with the same problem.
http://www.avsforum.com/avs-vb/showthread.php?t=715813

i havent tried yet but someone says to turn of the dialog enhance on the toshiba
Reply
post #55 of 126
8/27/06 at 2:18pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

uh, that worked
Reply
post #56 of 126
8/27/06 at 3:11pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Cool Tony
Reply
post #57 of 126
8/27/06 at 9:14pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

At first when I upgraded to v2.0, TrueHD sounded TERRIBLE to me... muted, buried surround effects, LFE was low, etc. What a damn let down, I didn't sign up for this!

However, after reading about turning "Dialog Enhancement" OFF when using TrueHD, I thought I'd give it a try. I did it and I'm now in TrueHD heaven ! TrueHD sounds awesome, it doesn't necessarily enhance the sound IMO, but brings out the finer details of the soundtrack more clearly. My ears are lovin' it!

Oh I'm using Constantine to listen to TrueHD, can't wait for End of Days .

P.S. If you're reading this Warner, consider putting a TrueHD track on Batman Begins, The Matrix Trilogy and Terminator 3... PPPPPPLLLLLLEEEEEAAAASSSSEEEEEE!
Reply
post #58 of 126
8/27/06 at 9:49pm
Thread Starter 

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Quote:
P.S. If you're reading this Warner, consider putting a TrueHD track on Batman Begins, The Matrix Trilogy and Terminator 3...
Batman Begins and The Matrix are already confirmed (see first post). Cross your fingers for the others...
Reply
post #59 of 126
8/27/06 at 10:34pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

And Superman Returns....dangit just put it on all of em.
Reply
post #60 of 126
8/27/06 at 10:45pm

Re: Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output

Batman Begins in TrueHD will blow the roof off of many houses. It's one of the best Dolby Digital tracks I've heard on SD-DVD, so let the drooling commence...

Also, can you imagine the opening sequence from Superman Returns in TrueHD (or the entire film for that matter)?
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Home Theater Forum › Home Theater Forum › Home Theater Hardware › Hi-Def Source Hardware (Players, STB and Cable Boxes, Antennas etc) › Firmware v2.0 now available -- adds TrueHD 5.1, fixes 720p output