New Posts  All Forums:Forum Nav:

Trouble With Punisher & Saw

post #1 of 16
6/28/06 at 4:55am
Thread Starter 
i just viewed T2 Punisher and Saw...Punisher and Saw had skips and dropped frames...punisher was the worse with skips every 30 seconds...Saw wasnt as bad but still had skips through out the movie...any one have this problem with Punisher or Saw....T2 wasnt bad but has a little grain in it and backgrounds could of been sharper....not bad for an older movie....i still think HDDVD is better....
Reply
post #2 of 16
6/28/06 at 8:49am

Re: Trouble With Punisher & Saw

Huh? Are you talking about HD DVD releases? I do not recall these titles being released into the HD DVD format.
Reply
post #3 of 16
6/28/06 at 9:13am

Re: Trouble With Punisher & Saw

Jack, Terry is referring to the Blu-ray releases from Lionsgate.

Terry, There is a thread over at AVS discussing this issue with titles from Lionsgate. One of the reviews over at High Def Digest also mentions a stutter with regards to Saw. I do not know how prevalent this stuttering might be, but it has been reported by others. ( Also, is it an issue with the Samsung player or the media? )

Rachael B's thread over at AVS

- Walter.
Reply
post #4 of 16
6/28/06 at 9:13am

Re: Trouble With Punisher & Saw

Yep, there's trouble with the Lion's Gate titles too per avs. Seems that probably due to compression or something else there are dropped frames during the film, stuttering when the camera pans, etc.
Reply
post #5 of 16
6/28/06 at 9:16am

Re: Trouble With Punisher & Saw

Although I only sampled each chapter on Punisher and Saw I experienced no such glitches.
Reply
post #6 of 16
6/28/06 at 9:19pm
Thread Starter 

Re: Trouble With Punisher & Saw

i think its just the software...i have all the movies on blu ray and saw and punisher were the only 2 i had the dropped frames with....underworld was spectacular and i got good quality out of 5th element,when i went to BB and CC the blu ray looked horrible on the 1080p samsung TV's...when i got the sammy home hooked up to my sony 1080i KDS-R50XBR1 the results were spectacular....i also have the toshiba XA1 that i love also....
Reply
post #7 of 16
6/29/06 at 3:40am
Thread Starter 

Re: Trouble With Punisher & Saw

thank you for the link to the AVS site Walter...seems like alot of people are having the stuttering problem....Amazon is sending me a new saw and punisher...i should get them today and will post the results i have with them...
REMEMBER:
YOU KEEP WHAT YOU KILL
so for now im not killing my blu ray because i might have to keep it
Reply
post #8 of 16
6/29/06 at 7:55am

Re: Trouble With Punisher & Saw

It was very obvious on THE PUNISHER. The only other Lions Gate Blu-ray I have is TERMINATOR 2, which did not seem to have a problem.
Reply
post #9 of 16
6/29/06 at 1:09pm

Re: Trouble With Punisher & Saw

I just viewed The Punisher in its entirety. I detected no skipped frames. I did, however, see very slight stutter on one pan scene. I am watching with Marantz projector and 8 ft screen. I used the DTS sound track.
Reply
post #10 of 16
7/2/06 at 7:00am
Thread Starter 

Re: Trouble With Punisher & Saw

i just recieved another punisher and saw from amazon and had the same response....i dont call it stutter i call it dropped frames....its skipping frames while going to the next scene....probably too large of a movie for single layer blu ray...its only on saw and punisher for all my blu ray movies and i have them all..had the same problem with freeze skipping and all that happy horse crap with my toshiba XA1 which was march built....got another one and it worked flawlessly...i also spent 2 hours hooking it up to component and the effect was the same....sent saw and punisher back to amazon for a refund...i can do without those 2 movies anyway....
Reply
post #11 of 16
7/2/06 at 12:40pm

Re: Trouble With Punisher & Saw

Terry, choose DD instead of DTS for audio and the judder will likel;y be gone. That worked for me with T2 last night. If Samsung can't fix this, or if Lionsgate's discs aren't recalled, my Samsung will proably go back.
Reply
post #12 of 16
7/3/06 at 3:54pm
Thread Starter 

Re: Trouble With Punisher & Saw

Quote:
Originally Posted by Rachael B
Terry, choose DD instead of DTS for audio and the judder will likel;y be gone. That worked for me with T2 last night. If Samsung can't fix this, or if Lionsgate's discs aren't recalled, my Samsung will proably go back.
thank you thank you thank you Rachael B,
your little trick worked by switching to DD.....and actually the sound was almost the same on DD....DTS was a little crisper and the center channel was clearer....it worked for punisher now to try saw......
thank you again
Reply
post #13 of 16
7/6/06 at 8:02am

Re: Trouble With Punisher & Saw

I tried this last night. It worked! By switching to the DD audio tracks, the discs now play fine with no studder.
Reply
post #14 of 16
7/6/06 at 2:14pm

Re: Trouble With Punisher & Saw

Is this acceptable?
If I had a regular DVD that did that, I would return it. If it were the player's fault, I'd be pissed after dropping $1K....
Reply
post #15 of 16
7/6/06 at 2:29pm

Re: Trouble With Punisher & Saw

Not acceptable, but at least I can watch the movies without studder now. Considering I'm renting most of this stuff from netflix anyway, I can live with it until they fix the issue.
Reply
post #16 of 16
7/6/06 at 5:14pm

Re: Trouble With Punisher & Saw

Rentals, got it.

Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Blu-ray