Emotiva UPA-2 Two Channel Audio Power Amplifier

The UPA-2...it's all about possibilities. A dynamic, high current Class A/B amplifier with a surprisingly modest price. Its advanced feature set makes it versatile enough for multiple applications.

1. A STAND-ALONE, AUDIOPHILE GRADE TWO CHANNEL AMPLIFIER
The UPA-2 is no toy. Inside the compact 2RU chassis are two of the same amp modules used in our UPA-7. They are horizontally mounted and driven by a high-current toroid transformer power supply. Built with the same high-quality/low noise standards as all Emotiva amplifiers, the UPA-2 is a reference level two channel power amplifier.

2. SYSTEM EXPANSION
• Boost your AVR: Receiver amplifiers face the limitations of the small space (and budgets) they are designed to work with, generally lacking the deep power reserves necessary for high quality sound. Add a UPA-2 to your existing setup, using it to drive your main left and right speakers. You'll instantly notice and appreciate greater dynamics, detail and headroom...and earn your receiver's thanks!

• Ideal building blocks for a growing Home Theater/Surround system: Upgrading from a 5.1 to a 7.1? It's never been simpler or more affordable. The UPA-2 is a perfect companion piece to an XPA-5 or XPA-3.

3. ZONE 2 AMPLIFICATION
Single or multiple UPA-2's are perfect for powering speakers throughout your household. Poolside. Kitchen. Dining room. Anywhere. The UPA-2's affordabe price, flexible design, and preamp in/out loop (for daisy chaining) along with individual level controls put you in control.

Power output:
• 8 Ohms = 125 watts RMS per channel (2)

• 4 Ohms = 185 watts RMS per channel (2)

• Frequency Response: +/- 0.1 db: 20 to 20Khz

• Broadband Frequency Response: -3db 10hz - 150khz

• Signal to Noise Ratio: (Un-weighted): >100db
• Distortion (THD, 80Khz bandwidth): 0.007

• Discrete, dual differential class AB amplifier topology with active current sources

• Low noise toroidal power transformer

• On Semiconductor output devices

• Damping Factor: Approximately 200 into 8 ohms

• Gain: Channels : 0-32db (adjustable)

• Input Impedance: 47K ohm

• External Trigger: 3-12 Volts DC (tip positive)

• DC Offset: <1mV servo corrected

• Crosstalk: >80db

• Fully protected from all fault conditions

• External trigger input/output (5-12 Volts DC - tip positive)

• Output/Level control

• Preamp in/out loop for daisy chaining

• Soft touch power switch

• 2RU chassis w/ solid milled aluminum faceplate

• IEC power inlet, 120/230 VAC configurable

• 17” W x 3 7/8” H (3.46" without feet ) x 18" D (including rear terminals/binding posts -16.7" from front to back plate)

• Weight: 30 lbs /13.6 kg. Shipping weight (with packaging): 39lbs /17.7kg