Mike_N

Center Channel - ok to box in?

Hi:
I am buying some new furniture for my HT.

I will have a shelf right above the TV. There will be about 15 inches of space above the shelf for my center channel.

My main concern: This shelf has walls on the left, right, and back. There is also a top shelf above where the center will sit. So in effect, my center will be 'boxed' in.

So my question to others: Does anyone have a similar setup for their center channel? Does it effect the sound negatively?

I also have the option of ordering the furniture without the left and right walls if that will help.

Any opinions? Thanks for your help.

JimMIT

Rokzi

I have a similar situation with my fronts (LCR). They're all on top of my RPTV and the RPTV is recessed with about 20" space between it's top and the top shelf. THe recess is about 30". My LRs are front ported but the center is rear ported. They seem to be fine there (as maybe because they still have some good amount of space as Jim suggested).

I'm wondering if putting some acoustic panels on the wall behind and on the sides will make a difference. Any ideas?

gene c

The L/C/R of one of my setups are also boxed in. Actually built into and behind the walls. The only issue I had was a little bit of "boomyness" which was eliminated by using a slightly higher crossover point than I usually use. As for sound deadening material, never thought to use it. Anxious to hear what others think about it. Probably a trial and error kinda thing as individual setups might be to unique to accurately advise.

Evan M.

A lot of people who a REALLY into the sound will tell you not to do this but I do it...an mine is rear ported and it sounds just fine. if it is rear ported just make sure it is open in the back or far from the wall of the back like someone said. In the stand I just finished I have all of my components and center speaker on the top shelf. When I want to listen to it I open the doors and when I don't it stays closed....very high WAF!!!!