Lee-c

Avia DVD calibration and the Radio Shack SPL meter?

I'm going to be getting one of the well-known Radio Shack SPL meters and I have the Avia DVD
for Dolby Digital reference DVD calibration. I was wondering if someone could please tell me
what, if any, correction needs to be applied to the dB readings on the SPL meter when
calibrating the main speakers, as well as the surround speakers when using Avia.

I know that the SPL meter has a certain insensitivity to bass frequencies, and thus corrections need
to be applied when calibrating a subwoofer. But we don't have a subwoofer yet, so we'll just be
dealing with the main speakers and surrounds for now. What frequency are the notes played by Avia
for Dolby Digital DVD reference level calibration of the mains and surrounds, and is there any
correction needed to get accurate readings when doing the calibration?

Also, what settings should the Radio Shack SPL meter be set to when calibrating the main speakers
and surrounds with Avia to get accurate readings?

Thanks for any help!

GeorgeJM

10Hz add 20
12.5Hz add 16.5
16Hz add 11.5
20Hz add 7.5
25Hz add 5
31.5Hz add 3
40Hz add 2.5
50Hz add 1.5
63Hz add 1.5
80Hz add 1.5
100Hz add 2

Lee-c

George: Thanks for the info. I take it from your post that at frequencies above 100 Hz the
Radio Shack SPL meter is more or less accurate and doesn't need any correction factor applied?

But what frequency does Avia use to calibrate the main speakers and surround speakers (remember,
no subwoofer in system) to Dolby Digital reference level?

Also, could someone please tell me the correct settings to activate on the front of the RS SPL meter
to get proper readings when calibrating just main speakers and surround speakers? Thanks.

GeorgeJM

C-Weighting, slow, and it doesn't matter if you're doing the subwoofer or surrounds. C-weighting, slow.

I don't remember what frequency Avia uses for spl calibration, but it uses different frequencies for main/center/surrounds and a sub.

AFAIK, above 100Hz the RS meter doesn't need correction.

Lee-c

George, much thanks for the great info.!

Even though we may not know the exact calibration frequencies used for the mains, surrounds, etc.,
do you know if the frequencies used for the mains and surrounds are definitely well above 100Hz,
and thus there is no need for any correction factor to be applied to the SPL meter readings
when calibrating the mains and surrounds?

Zack_R

I've not heard of anyone ever suggesting that coorection factors should be applied. It would be nice to know for sure but I'm thinking the meter will be within a db of being spot for those frequencies. Heck it be great if it read low as it would make a lot of HT systems closer to achieving reference but I wouldn't bank on it. If it reads high we'll all be upgrading

Lee-c

An update on the compensation chart for the Radio Shack SPL meter. Over at the SVS site they have
a low frequency compensation chart listed for the RS SPL meter and apparently there is still some
lack of sensitivity even at 125Hz. So I thought you'd want to know about that.

Here is the compensation chart from SVS on the Radio Shack SPL meter.

12Hz add 16.5dB
16Hz add 11.5dB
20Hz add 7.5dB
25Hz add 5dB
31.5Hz add 3dB
40Hz add 2.5dB
50Hz add 1.5dB
63Hz add 1.5dB
80Hz add 1.5dB
100Hz add 2dB
125Hz add .5dB


This still leaves the question. Are the calibration frequencies used for the main speakers
and surround speakers on the Avia DVD above 125 Hz, so that no compensation is needed to correct
your RS SPL meter readings?

Anyone know the answer?

Geoff L

If your reading specific frequency tones with the spl meter, be it warrbel or sine, then you need to use the correction factors from aprx 125Hz down.

As far a setting channel levels with Avia, no correction needs to be applied when setting the different channel levels.

Avia explains everything you may want/need to know on the Avia disc itself about speaker/system calibration
C-weighting, slow response, and set volume to your liking if referance is to loud. Many calibrate at -10 under=75db.

"85db" per channel if you want to calibrate to "Reference Volume".

Regards
Geoff

dusty

Lee-c

Thanks for the info.

Ok, I won't apply any corrections to the SPL readings when calibrating my main speakers and surround speakers
with the Avia DVD.

My intention is to calibrate to Dolby reference level with the volume control set to 00dB,
and then just back off the volume to -5, -10, -15 or whatever seems like a reasonable volume
when actually watching movies.