NateMorse

Bass Shaker Wiring Help

Need some help wiring my bass shakers if anyone can help, this is what I am thinking of doing right now. I have a Sherwood 105x2 @ 8 ohm receiver. I would like to run 4 shakers off of each channel, and each shaker is 4 ohms and 25 watts max. So this is how I am thinking of doing the wiring to get the ohm level and watts correct per shaker. I am thinkin of making two series setups containing 2 shakers then these two series are brought together in a parallel connection that goes to the amp. If thats right it should take the 2 8 ohm series and make it 8 ohms to the reciever and sending 25 watts or so to each shaker?

diagram of what I am talking about
critterhart.com/nacho/bass/bassshakers.jpg

Aaron_Morris

You will want to wire two shakers in series to an individual channel. You should have two sets of shakers each will provide an 8 ohm load. Do not wire the sets in parallel with each other or you will be showing a 4 ohm final load to the amp.

There are 10 kinds of people in this world, those who understand binary and those who don\'t.