Equalizer options?

Todd Stout · 03-07-2005, 12:56 AM

Hello all,

I am interested in purchasing some sort of a graphic or parametric equalizer with a spectrum analyzer display to use with my Onkyo TX-DS777 receiver (mainly just for stereo music). I can't seem to find any audio manufacturers that still make this type of component. Are there any companies that still manufacture this type of thing?

I have seen several discontinued models that have caught my eye such as the ADC SS-412X, Kenwood 1070KE, and Technics SH-GE90 but I'm not too familiar with any of them. I'm just wondering if something like any one of these units is still available. If not, I guess I'll have to start scouring eBay for one.

Thanks.

Wayne A. Pflughaupt · 03-07-2005, 10:32 AM

Better get busy on eBay. I think the only one made any more is a low-end model from AudioSource. It won’t be a problem going with a used one, though – these things have a virtually non-existent casualty rate.

You have to keep in mind that with a home theater system you can’t connect these equalizers to a tape monitor loop, like in the old days. They can only be used between the receiver’s pre-outs and main-ins, or in-line between the CD player and the receiver’s analog inputs.

You might find this of interest:
Helpful Tips on Using a Stereo Ten-Band Equalizer

Regards,
Wayne A. Pflughaupt

Todd Stout · 03-07-2005, 11:55 AM

Man, I was afraid I was going to hear that. My receiver thankfully has the pre-out and main-in loop available so that isn't a problem. You know... It wasn't until I scored an old Yamaha DSP-1 that I realized that my Onkyo didn't have actual tape monitor loop like my old 80's vintage integrated amplifier.

I'll have to admit that I partially want something like that for wow factor of the spectrum analyzer display. It would also be nice to nice to be able to have greater tone control capabilities while listening to 2-channel music. I currently own a 1986 vintage Fisher graphic equalizer with spectrum analyzer display but I’d like something a bit more sophisticated with an actual mic input for taking room measurements.

Thanks for the link... it was quite interesting.

amatala · 03-07-2005, 12:22 PM

I have been using a Behringer Tube Ultra-Q with spectacular results.
Behringer offers a wide range of Studio Equalizers at a very affordable price:
http://www.behringer.com/02_products...%20ACCESSORIES

Anyway, you only need e few connector adapters and you're set! I've placed my Ultra-Q between my Marantz CD5400OSE player and my H/K AVR430 receiver and CDs sound great!

Todd Stout · 03-07-2005, 03:01 PM

I found those on the Web the other night but I wasn't sure if they'd work or not because of the lack of RCA style connections on the back. That's good to know that those will work as well. What sort of adapters are needed to use one of those?

**HTF Ads**

amatala · 03-07-2005, 03:29 PM

I am using RCA to 1/4" jack adapters. See reference 27-162-0 on this page:
http://www.a1parts.com/AudioAdapters/audioadapters.htm

Anyway, having to use these extra adapters is a minor inconvenience. These Pro Audio EQs are way better than any consumer EQ I've tried before. I had also tried the AudioSource EQ and was very unhappy with the result.

Bill Polley · 03-07-2005, 06:40 PM

I also use Behringer for all channels. For the sub, I use the Behringer 1024 DSP 12 band stereo fully parametric EQ (as do MANY others here). For each of my other speakers, I use this 31 band digital 31 band stereo EQ. I have the calibrated microphone that matches these equalizers, and in about 2 minutes I can flatten the room response of each of my speakers individually. I have a very good system, but with the equalization it REALLY shines. I highly recommend them.

Todd Stout · 03-07-2005, 07:47 PM

The Behringer DSP8024 looks just about like what I am after (although the ULTRACURVE PRO DEQ2496 looks nice too). How would I connect something like this to the line-out and main-in loop on my receiver? Are those XLR connectors on the back?

Wayne A. Pflughaupt · 03-07-2005, 09:09 PM

Quote:

I am using RCA to 1/4" jack adapters. See reference 27-162-0 on this page:

It’s a popular option, but I suggest taking a pass on the adapters. A better option is to simply get a cable with the correct connectors on both ends, like this:

You can probably find them at your local guitar shop.

Quote:

Are those XLR connectors on the back?

It probably has 1 /4” connectors, too. It’s best to use those, as they’re easier to adapt to RCA’s than XLRs.

Regards,
Wayne A. Pflughaupt