New sub project underway!!! Pic!!!!

SteveSpoon · 03-18-2005, 05:02 PM

After practicing up on my two 8" Dayton's, it was time to tackle the mighty 12"DVC from Dayton, 250 watt plate amp, and 1" MDF enclosure.

Don't have any time for more info at this time, but here's a quick pic ..............more to follow!!

Steve

SteveSpoon · 03-18-2005, 05:04 PM

What the heck.........work can wait!! Here's another pic. Massive bracing on the inside.

Steve

Mattak · 03-18-2005, 06:58 PM

Looks nice! What are you cutting with?

steve all · 03-18-2005, 08:52 PM

looks like quality work to me for sure!

SteveSpoon · 03-18-2005, 09:38 PM

I wish I could take credit for the fine cuts on the MDF. It's that (and I believe it is now discontinued) Tempest kit from Parts Express that I've finally gotten around to putting together.

The cuts in the kit are very accurate. Just a matter of glue and nailing.

Steve

**HTF Ads**

Jason Dalton · 03-18-2005, 11:15 PM

That looks like one damn stout cabinet...mmmm, stout...

SteveSpoon · 03-19-2005, 09:26 AM

Another pic:

I really don't know what the heck I'm doing with it though. Just lining the walls with that foam stuff from Parts Express and plan on leaving it sealed. I don't have a clue on how to "tune it", so guess I'll just have to leave it sealed.

Cabinet is a Parts Express 3.0 cubic foot behemoth. It is very heavy.

Anyway, I'll send a couple more pics along with the progress I make with it.

Steve

Robert_J · 03-19-2005, 09:34 AM

Optimum size sealed enclosure for the 12" DVC is 1.2 cubic feet. Anything larger and you are at risk of bottoming the driver. This was deterimined a couple of years ago on the PE tech talk board.

Since we know it's a 3 cubic foot cabinet, you can tune it by putting in a 3" PSP flared port (available from PE). This will give you something very similar to the Adire Alignment designed for the Shiva.

-Robert

SteveSpoon · 03-19-2005, 09:42 AM

Thanks Robert. Guess I'll get the ole' Parts Express catalog back out!! Needed "feet" for the sub to sit on, anyway. Was going to make them, but since I'll be looking into a port, guess I'll just have them send me some "feet" as well. Thanks.

Steve

SteveSpoon · 03-19-2005, 01:03 PM

Oh man, I just knew this was going to happen.........the reason I've been putting this project off is because of all the different "ways" I could go with it.......sealed, ported, etc.

I looked in the Parts Express catalog and am not sure which one to order. Any help on this?

Any other suggestions or things I'm overlooking? Thank you.

Steve