Forum NewsForumsHTF Chat Hardware ReviewsSoftware Reviews HTF Events
Home Theater Forum
Home Theater Forum
Home Theater Forum
Home Theater Forum
Live Search: 
Web Search: 
 
Home Theater Forum
Home Theater Forum
Home Theater Forum




 
Forum Jump

Forum Sponsors


Post New Thread  Reply

 
Thread Tools Search this Thread
Home Theater Forum
Old 02-02-2005, 10:58 AM   #1 of 4
Bryce_H
Member
 
Join Date: Oct 2004
Local Time: 10:45 AM
Local Date: 11-18-2008
Posts: 98

Exhaust fans


Hola All,
Well I'm am finishing my basement into a dedicated home theater and want to install 2 exhaust fans. One for my projector hush box and one for my component cabinet. I know what I want to do, just not exactly how to do it or where to buy the parts

Hush Box: I will have an air intake in the projector hush box, run flexible vent tubing (with several bend to decrease noise transmission) to an exhaust port in another room. The exhaust port end will have the fan on it. I would like the fan hard wired but triggered by my Sony VPL-400Q 5v DC control (why sony picked 5v instead of 12v - who knows!!). Not a current concern, but will replace with a 12v trigger when I get a new projector.

Component cabinet: similar setup to above, but will be powered and triggered by the switched outlet on my receiver (Yamaha DSP-A3090)

So where can I buy the fans?. Looking for good CFM (>50) and low noise. I first thought about computer fans, but they all run off 12v. I checked the bathroom fans at Home Depot and Lowes, but they all seems overkill for what I need - plus their loud (unless you drop some cash), and the fans is at the intake end.

Basic question: Where can I buy 120v (household current) fans - preferrable at a resonable cost.

Thanks.
Bryce_H is offline Quote this post in a PM Send Support Ticket
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote Multi-Quote with this Post
sendpm.gif
Home Theater Forum
Home Theater Forum
Home Theater Forum
Home Theater Forum
Old 02-02-2005, 11:23 AM   #2 of 4
Mark McGill
Member
 
Join Date: Feb 2002
Local Time: 08:45 AM
Local Date: 11-18-2008
Posts: 96

Is there any chance you can run a conduit to your cold air return. If you can do that then all you need to do is set your thermostat to fan on in your program and you will draw lots of air if needed. Personally if you are using your basement alot I would keep the setting of fan on anyhow since it will equalize the temp better and cut down on moisture. Good luck.
Mark McGill is offline Quote this post in a PM Send Support Ticket
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote Multi-Quote with this Post
sendpm.gif
Home Theater Forum
Home Theater Forum
Old 02-02-2005, 01:14 PM   #3 of 4
David Noll
Member
 
Location: Central PA
Join Date: Aug 2004
Local Time: 11:45 AM
Local Date: 11-18-2008
Posts: 238

I just had hush box fans installed yesterday in my theater. My installer used a Broan bathroom exhaust fan to push air into the hush box from another room (storage space) and used a radon fan to draw air out of the hush box. They are about 14 feet away and use HVAC flexible duct. Both fans just hang off joists with bungee straps eliminating any vibration noise. I plan on leaving them run 24/7 so I don't have to worry about damage my Runco projector if they are forgotten or fail to turn on. I know the radon fan is designed to run forever.
David Noll is offline Quote this post in a PM Send Support Ticket
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote Multi-Quote with this Post
sendpm.gif
Home Theater Forum
Home Theater Forum
Old 02-02-2005, 02:33 PM   #4 of 4
Bryce_H
Member
 
Join Date: Oct 2004
Local Time: 10:45 AM
Local Date: 11-18-2008
Posts: 98

Thanks for the suggestions. I talked with an HVAC contractor and had already asked him about the cold air return option. He indicated that it was not a good idea (can't remember the specific reason).

The radon fans might be a good choice. Would like to have them activated by the trigger or a switched outlet on a component. Do you know what the CFM of the fans are?
Bryce_H is offline Quote this post in a PM Send Support Ticket
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote Multi-Quote with this Post
sendpm.gif
Home Theater Forum
Post New Thread  Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off
Forum Jump

All times are GMT -5. The time now is 11:45 AM.
Total Page Views Since 7/8/2006: 175,657,444 | Page Views Today: 92,301


Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0

© 1997-2008 PARRON Enterprises, LLC
No part may be copied or reproduced without the
express written permission of the owners of this site.

  
Skin Chooser: