Cutting a hole in the wall for rear projection TV?

Jim Rykel · 10-30-2003, 01:04 PM

I know I've seen this done by someone here, but can't find any examples doing a search.

I have a small dedicated HT room in the basement and thought I might add a couple of feet by cutting a hole in my wall and placing my 61" Tosh WS behind it so only the screen protrudes from the wall. It's drywall with exposed studs behind.

Any examples of this? Any thoughts? I don't want it to look cheesy...

Jim

Ron-P · 10-30-2003, 01:20 PM

I believe most build false walls around their RPTV's so it looks like it's depressed into the wall. Are you sure your wall is 2' thick, seems like a lot of wasted space if so. If you do this, make sure your not cutting into any bearing walls and such.

Peace Out~

Jim Rykel · 10-30-2003, 01:33 PM

Ron - my wall isn't 2 feet thick - the TV is!

I will pick up the extra space by moving the TV behind the wall. It's not a load-bearing wall and is only drywall and exposed studs in back. Should be fairly simple, but would like to see other examples or read anyone's experience doing this.

Ron-P · 10-30-2003, 02:02 PM

Ahhh, gotcha, misunderstood your description.

Peace Out~

Erik Farstad · 10-30-2003, 02:28 PM

Jim, I did just what you're talking about before I went Frong Projection...and it's all documented on my website...see link in my sig!

But here's a quick shortcut:

http://www.devotionsbyerik.com/HT-In...0Equipment.htm

E

**HTF Ads**

Jim Rykel · 10-30-2003, 02:57 PM

Thanks Eric - Your's was the one I remember seeing. I've got some serious measuring and planning to do before I tackle this project!

Erik Farstad · 10-30-2003, 03:45 PM

No problem, feel free to e-mail me if you have any questions on how to do it...in short, cut the studs, install a header, and frame the opening as you would a window and you're all set!

E

Ed O'Neill · 10-31-2003, 09:22 AM

Hey,

Just a reminder...It's not recommended to box in a rptv, It needs to breath. Thats what I was told when the came to bring my rptv, and they saw where it was going.

You see I did something similar I put mine in the closet. The the closet is 12 inches wider than the rptv (6 inches on either side. I then put up curtains on either side to hide the gaps and still the rptv can get some air. I did discuss this with the store employees and they still said it was iffy but was definetly better than toatally boxing it in like I was original plannig

Just my 2 cents
Ed

Erik Farstad · 10-31-2003, 12:36 PM

Ed, as long as you give it room to breath from behind, where the most venting occurs as well as underneath, one should be ok. To completely close it off and have no place for air to go would be bad yes!

E

Ed O'Neill · 10-31-2003, 12:50 PM

Yes exactly Eric,

I noticed your theater is done right. I however wanted Jim and others to know that it does need to breath.

As I stated my situation is really borderline.

Thanks,
Ed

Jim Rykel · 10-31-2003, 03:42 PM

The back of my TV will be completely open - plenty of ventilation where it's going. Thanks for the advice - might start this next week!

Ed O'Neill · 11-01-2003, 11:52 AM

Great Jim !

Just wanted you to know this.

Good Luck ...Let us know how it came out.

Signed
ED