|
Re: HD-A! - "HDMI Error 1"
TJohn; yes it had been playing ok with the exception of some audio and HDI No Link messages as I noted in another thread. After some input from where I bought it; I did the following:
1. Set all components to the settings I wanted when playing HD (TV to Video input #7; HDMI switcher on input #2; etc. etc.)
2. I powered everything off;
3. I disconnected and reconnected, after several seconds, the HDMI to the input on the TV;
4. I then first turned on the HDMI switcher, then the TV and then the HDA1, with the HD DVD in it;
4. Start up and play back was flawless and no quirks or quarks at all.
This is only a one-off I realize, however, I will try to do this experiment several times, perhaps reducing the number of steps (like i am not sure I even needed to disconnect and reconnect the HDMI cable with everything powered off), and let you know.
I will say, in relation to the 'No HDMI Link' msg and the HDMI switcher and TV input. The player immediately stops playing when the switcher is not set to the proper input, and if the TV is not set to the proper input. Both situatiuons require, in my case, that I push Setup, and then push it again without actually doing anything and it resumes normal operation. Don't ask me why toggling the Setup button does this or requires that I do it...I havent the foggiest idea!
Anyways...hope this helps others as well. Cheers
|
