|
Bill,
It almost sounds like your either seeing extreme edge enhancemnt (too much sharpness), or possibly ghosting in the picture. If it is edge enhancement it is correctable by turning off edge enhancement circuitry or by reducing the sharpness control. If it is ghosting it is most likey in the signal source itself.
Something is definitely going wrong here. The question is what exactly is it? and how do you correct for it?
On all of the LCD displays and DLP displays I have setup I have been able to get excellent results without any of these issues.
Also keep in mind that the sets on these show room floors are most likely set at what they would be out of the box and not adjusted/calibrated at all.
Regards,
David Abrams
ISF Calibrationist
Avical/Precision Theater Consultants (www.AviCal.com)
I2C Equipped
Phone: 323-571-8044
Email: PrecisionTheater@aol.com
Offering Regular Calibration Services in the Southern California area.
|