Projector vs. HDTV

JPetrillo · 01-22-2008, 04:16 PM

Hello everyone

I was originally considering buying a big screen HDTV, but now I'm thinking about getting a HD Projector instead, since obviously I could get the same size (or bigger) screen for a smaller amount of money!

In my own experience (which isn’t much) projectors that I've always seen in person where never as good of quality as those nice big HDTV's. I wouldn’t want to get a projector unless I could get the same (or better quality) as a 1080p HDTV.

So my question is: are there any projectors out there that have at least the same quality as 1080p HDTV's and if so which ones are they?

Thanks for your help in advance!

Jim Mcc · 01-22-2008, 07:34 PM

Yes, 1080p projectors. Go to Projectorcentral.com and Projectorreviews.com.

Robert_J · 01-22-2008, 09:22 PM

Quote:

Originally Posted by JPetrillo

In my own experience (which isn’t much) projectors that I've always seen in person where never as good of quality as those nice big HDTV's.

You haven't seen a projector in a properly set up room (100% light control), properly calibrated and fed a quality HDTV source. My Panasonic AE900U projecting on a 103" DIY screen looks just as good as my 55" Mitsubishi rear projection TV. If you want to install the projector in a living room with a lot of windows or want to use a drop down screen (they wrinkle) or take any other short cuts then you will end up with a disappointing picture. The environment and screen is sometimes more important than the projector you choose.

Post your location in your profile. You may find a local willing to give a demonstration. I've had a few people over to see my setup and were impressed. Especially when I told them that my screen cost less than $100.

-Robert

jblfx · 01-22-2008, 09:43 PM

I own a Sharp XR-10S projector with a 100 inch screen. I know its not the top of the line, but I think it looks awesome! I have the HD cable box hooked up to a receiver then to the projector by S-video. Most digital cable channels look really good. DVDs and HD cable channels look great.

So I can only imagine what a higher priced projector would look like.

Jim Mcc · 01-23-2008, 02:01 AM

jblfx, why are you using S-video instead of component? HD signals can't even be sent over S-video.

**HTF Ads**

Doug_H · 01-23-2008, 03:40 PM

I give another vote for PJ. There is nothing like a well calibrated projector for watching movies and sports. I have a Plasma and DLP TV in other rooms and I will always prefer the PJ.

jblfx · 01-23-2008, 09:20 PM

Well, this projector didn't come with component plugs. It only has s-video or composite video. But we are getting HD cable channels. While watching a local station, you can flip back and forth between the regular and HD version and see a huge difference. I would assume that if this projector was not HD compatible we wouldn't get a picture at all, correct?

Doug_H · 01-23-2008, 09:43 PM

Luis

The cable box downconverts the video to a level S-Video outputs can handle. I use both outputs on my HD box so I can set up the DVR without turning the PJ on. It is connected to a $79 9" TV that is definitely not HD.

I am sure the picture is better than the SD channel being upconverted but it is not HD.

Jim Mcc · 01-24-2008, 01:40 AM

jblfx, what you need to do is use the VGA input on projector to run component cables. You have 2 options: 1) Get a VGA/component adapter that plugs into VGA input on projector. You then hook up component cable to that. Or 2) Get a cable with VGA on one end, and component on the other end. I used method #1 with my old X1 projector. I recommend Monoprice.com to purchase either one. You'll notice a nice improvement once you switch to component cables.

plinkoking · 01-24-2008, 11:52 AM

good info thanks

jblfx · 01-24-2008, 03:37 PM

OK, well it looks really good. We've had it for about