|
Re: Got my Svs Ultra, have question about setup with 2 subs
Tried and run the testsignal again. I get these numbers, on the same sound level. I ran them 3 timers:
The PB13 Ultra alone / The Svs and servo together:
20 hz - 75 db / 75 db
30 hz - 77,1 db / 76 db
40 hz - 62,5 db / 62,2
50 hz - 62,6 db / 73,4
60 hz - 72 db / 82,2
70 hz - 66,3 db / 75,5
80 hz - 74,6 db / 70,6
90 hz - 73 db / 73,8
From 50-70 hz i get around 10 db more using both subs. Below 50 hz its about the same, and on 80 hz its actually 4 db lower than the svs alone.
The svs alone varies from 62 hz to 77.
The 2 subs varies from 62 to 82 hz. A 20 db jump.
Would I be better off using just the svs alone to get a more even level ?
And would you use the PEQ at these numbers if using the svs alone and at which frequency ?
Michael
|