|
Re: Bi-Amping: Best way to split signal from pre-amp to amp?
A Y-cable or splitter will send the full-range signal to each channel, just at half power. That's not bi-amping, it's more like using the B speaker outputs on an older receiver.
The whole point of bi-amping is to separate the frequencies, so that the amp driving the woofer only has to amplify the bass frequencies and the amp driving the mid-range & tweeter in only driving the mids and highs. If you really want to bi-amp, then you need to install an external crossover for each channel between the preamp and power amp.
Dan
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."
--Benjamin Franklin
|