Home Theater Forum - View Single Post - Built a new PC and have some questions...

Brian Sharp · 03-30-2007, 11:13 AM

Might be worth a look at:

Start>Control Panel>System>Hardware>Device Manager>Network Adapter

Then click on the + sign alongside the Network Adapter to open it and then right click on your network adapter and select "Properties".

This should bring up a screen where about half way down there is a box with device status. It should say the device is working properly. If not there is a trouble shooting option.

Also are there any options for LAN ethernet in the Bios setup?

Good luck!

Brian

03-30-2007, 11:13 AM	#9 of 10
Brian Sharp Member Join Date: Oct 2005 Local Time: 08:20 AM Local Date: 11-23-2008 Posts: 119	Re: Built a new PC and have some questions... Might be worth a look at: Start>Control Panel>System>Hardware>Device Manager>Network Adapter Then click on the + sign alongside the Network Adapter to open it and then right click on your network adapter and select "Properties". This should bring up a screen where about half way down there is a box with device status. It should say the device is working properly. If not there is a trouble shooting option. Also are there any options for LAN ethernet in the Bios setup? Good luck! Brian