10-08-2006, 01:49 PM
|
#12 of 14 
|
|
Seth L
Member
Location: I live over there.
Join Date: Jul 2006
Local Time: 11:00 AM
Local Date: 12-01-2008
Posts: 1,294
|
Re: SVS tuning?
Quote:
|
Originally Posted by timZa
Just wondering where most of you have your Ultra or Plus2 tuned. also does it matter which port is plugged for 20hz, the top or bottom? i gave the 20hz a try but did not stick the plug all the way down in the port. now looking at the manuel it says to drive it in the port about 1 inch from being flush. when i did the 20hz i had it sticking out several inches, would that make much difference?
|
I would like to think plugging the top would be the best option since most subs that have just one reflex port have them positioned lower on the cabinet. Also about the plug being in a certain distance, I don't think it would make much difference so long as it is completely closed with no air leak. I used to have a Paradigm PS-1000 which was a bandpass enclosure with three large reflex ports on the rear. I used cloth to plug the ports and it sounded fine. Without at least one port plugged the subwoofer was a chud machine. It actually sounded nice after I plugged some ports.
|
|
|