Home Theater Forum - View Single Post

Rob Gardiner · 09-30-2004, 06:04 PM

Make sure the jumper on the back is properly set to either "Master" or "Slave". When 2 drives share an IDE cable, the primary drive is designated Master and the other is the Slave.

09-30-2004, 06:04 PM	#4 of 21
Rob Gardiner Member Join Date: Feb 2002 Local Time: 05:56 AM Local Date: 12-05-2008 Posts: 2,895	Make sure the jumper on the back is properly set to either "Master" or "Slave". When 2 drives share an IDE cable, the primary drive is designated Master and the other is the Slave.